LogoRapitron

Industrial video
Progressive scan black/white cameras
with mini Camera Link or Power over Camera Link

Sito in italiano

Monochrome analog - Monochrome progressive scan - Color . 3 CCD color

Progressive scan - Monochrome megapixel - Camera Link - Mini Camera Link - Firewire - Gige


Search

All cameras are supplied without lens, unless otherwise indicated

Hitachi.gif (3813 byte)

KP-F30SCL/KP-F30PCL

Ultra compact progressive scan camera           

bulletUltra compact progressive scan 1/3" camera.
bulletHigh resolution with 330.000 pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 10 or 8 bit per pixel output.
bulletFrame rate 91fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F30SCLKP-F30PCL
Imaging device

CCD 1/3" interline transfer

Total pixels

692 (H) x 504 (V)

Effective pixels

659 (H) x 494 (V)

Pixel pitch7.4μm(H) x 7.4μm (V) (square lattice)
Imaging area4.88mm(H) x 3.66mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate60fps (full pixel readout)
Scanning ratehorizontal: 31.468  KHz
vertical: 59.94 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
Data base configuration 10bit x 1
clock: 24.5454 MHz
Resolutionhorizontal: 500 lines
vertical: 490 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination1.0 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/50000, 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/60 sec
factory setting: Off (1/60 sec)
or 1280 steps  changeable by variable shutter (min 1/10000 sec)
Gamma1.0
Frame on demandremote setting
(fixed shutter, one trigger and reset control)
factory setting is all off
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 120 mA
(approx 1.5W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)29mm x 29mm x 29mm
 dimensional drawing  		29mm x 29mm x 29mm
 dimensional drawing  
Weightapprox 53g
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor
Response curveresponse curve

 

KP-F31SCL/KP-F31PCL

Ultra compact progressive scan camera           

bulletUltra compact progressive scan 1/3" camera.
bulletHigh resolution with 310.000 pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 10 or 8 bit per pixel output.
bulletFrame rate 120fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletVD reset mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F31SCLKP-F31PCL
Imaging device

CCD 1/3" with progressive scan

Total pixels

692 (H) x 504 (V)

Effective pixels

659 (H) x 494 (V)

Pixel pitch7.4μm(H) x 7.4μ (V) (square lattice)
Imaging area4.88mm(H) x 3.66mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate120fps (full pixel readout)
Horizontal drive frequency49.090902 MHz
Scanning ratehorizontal: 62.94 KHz
vertical: 119.88 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
Data base configuration 10bit x 1
clock: 24.5454 MHz x 2 TAP
Resolutionhorizontal: 500 lines
vertical: 490 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination7.4 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/120 to 1/100000 sec
(variable setting)
Gamma1.0
Frame on demandremote setting
(fixed shutter,one trigger and VD reset)
Partial scanselectable start position and width of picture grabbing in 1H step
Offset0 to 128 steps level/10 bit 33steps variable (factory setting: 0 steps level)
Gain setting0 to 12 dB (128 steps variable)
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 200 mA
(approx. 2.4W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)29mm x 29mm x 38mm
 dimensional drawing  		29mm x 29mm x 38mm
 dimensional drawing  
Weightapprox 60g
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

KP-FB30SCL/KP-FB30PCL

Telecamera monocroma 1/3" a scansione progressiva a testina separata con uscita mini Camera Link           

bulletUltra compact progressive scan remote head 1/3" camera.
bulletHigh resolution with 310.000 pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 10 or 8 bit per pixel output.
bulletFrame rate 60fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletVD reset mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-FB30SCLKP-FB30PCL
Imaging device

CCD 1/3" with progressive scan

Total pixels

692 (H) x 504 (V)

Effective pixels

659 (H) x 494 (V)

Pixel pitch7.4μm(H) x 7.4μ (V) (square lattice)
Imaging area4.88mm(H) x 3.66mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate60fps (full pixel readout)
Horizontal drive frequency24.5454
Scanning ratehorizontal: 31.468 KHz
vertical: 59.94 Hz
Synchronizationinternal
Lens mountspecial mount
Video output signalsCamera Link
clock: 24.5454 MHz
Resolutionhorizontal: 500 lines
vertical: 490 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination7.4 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/60 to 1/100000 sec
(variable setting)
Gamma1.0
Frame on demandremote setting
(fixed shutter,one trigger and VD reset)
Partial scanselectable start position and width of picture grabbing in 1H step
Offset16 to 128 steps level/10 bit 29steps variable (factory setting: 16 steps level)
Gain setting0 to 12 dB (301 steps variable)
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 205 mA
(approx. 2.4W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)

head: 12mm x 12.5mm x 47.5mm
CCU: 29mm x 29mm x 38mm
 dimensional drawing  

head: 12mm x 12.5mm x 47.5mm
CCU: 29mm x 29mm x 38mm
 dimensional drawing  

Weighthead: approx 18g
CCU: approx 50g (without cable)
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 301 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

 

KP-F39SCL/KP-F39PCL

Ultra compact progressive scan megapixel camera           

bulletUltra compact progressive scan 1/3" camera.
bulletHigh resolution with 330.000 pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 10 or 8 bit per pixel output.
bulletFrame rate 91fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F39SCLKP-F39PCL
Imaging device

CCD 1/3" with progressive scan

Total pixels

692 (H) x 504 (V)

Effective pixels

659 (H) x 494 (V)

Pixel pitch7.4μm(H) x 7.4μ (V) (square lattice)
Imaging area4.88mm(H) x 3.62mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate91fps (full pixel readout)
Scanning ratehorizontal: 46.875  KHz
vertical: 91.73 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
Data base configuration 10bit x 1
clock: 36.000 MHz
Resolutionhorizontal: 500 lines
vertical: 490 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination7.4 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/50000, 1/10000, 1/4000, 1/2000, 1/1000, 1/250, 1/91 sec
factory setting: Off (1/60 sec)
or 547 steps  changeable by variable shutter (min 1/10000 sec)
Gamma1.0
Frame on demandremote setting
(fixed shutter and one trigger)
factory setting is all off
Partial scanselectable start position and width of picture grabbingin 1H step
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 160 mA
(approx. 2.0W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)29mm x 29mm x 29mm
 dimensional drawing  		29mm x 29mm x 29mm
 dimensional drawing  
Weightapprox 50g
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

 

KP-F80SCL/KP-F80PCL

Ultra compact progressive scan megapixel camera           

bulletUltra compact progressive scan 1/3" camera.
bulletHigh resolution with 810.000 pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 10 or 8 bit per pixel output.
bulletFrame rate 36fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F80SCLKP-F80PCL
Imaging device

CCD 1/3" with progressive scan

Total pixels

1077 (H) x 788 (V)

Effective pixels

1034 (H) x 779 (V)

Pixel pitch4.65μm(H) x 4.65μ (V) (square lattice)
Imaging area4.81mm(H) x 3.62mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate36fps (full pixel readout)
Scanning ratehorizontal: 28.346  KHz
vertical: 35.79 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
Data base configuration 10bit x 1
clock: 36.000 MHz
Resolutionhorizontal: 800 lines
vertical: 800 lines
Sensitivity400 lux, F2.8, 3200°K
Minimum illumination1.0 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/50000, 1/10000, 1/2000, 1/1000, 1/250, 1/125, 1/60, 1/36 sec
factory setting: Off (1/36 sec)
or 547 steps  changeable by variable shutter (min 1/10000 sec)
Gamma1.0
Frame on demandremote setting
(fixed shutter and one trigger)
factory setting is all off
Partial scanselectable start position and width of picture grabbingin 1H step
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 120 mA
(approx. 1.5W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)29mm x 29mm x 29mm
 dimensional drawing  		29mm x 29mm x 29mm
 dimensional drawing  
Weightapprox 50g
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

KP-F200SCL/KP-F200PCL

Ultra compact progressive scan megapixel camera           

bulletUltra compact progressive scan 1/1.8" camera.
bulletHigh resolution with 2.01 million pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 12, 10 or 8 bit per pixel output.
bulletFrame rate 15fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F200SCLKP-F200PCL
Imaging device

CCD 1/1.8" with progressive scan

Total pixels

1688 (H) x 1248 (V)

Effective pixels

1628 (H) x 1236 (V)

Pixel pitch4.4μm(H) x 4.4μ (V) (square lattice)
Imaging area7.16mm(H) x 5.44mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate15fps (full pixel readout)
Scanning ratehorizontal: 18.75  KHz
vertical: 15 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
Data base configuration 10bit x 1
clock: 36.000 MHz
Resolutionhorizontal: 1200 lines
vertical: 1200 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination1.0 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/50000, 1/10000, 1/2000, 1/1000, 1/250, 1/125, 1/60, 1/15 sec
factory setting: Off (1/15 sec)
or 547 steps  changeable by variable shutter (min 1/10000 sec)
Gamma1.0
Frame on demandremote setting
(fixed shutter and one trigger)
factory setting is all off
Partial scanselectable start position and width of picture grabbingin 1H step
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 170 mA
(approx. 2.1W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)29mm x 29mm x 29mm
 dimensional drawing  		29mm x 29mm x 29mm
 dimensional drawing  
Weightapprox 50g
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

KP-F230SCL/KP-F230PCL

Ultra compact progressive scan camera           

bulletUltra compact progressive scan 1/1.8" camera.
bulletHigh resolution with 2.01 million pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 10 or 8 bit per pixel output.
bulletFrame rate 30fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletVD reset mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F230SCLKP-F230PCL
Imaging device

CCD 1/1.8" with progressive scan

Total pixels

1688 (H) x 1248 (V)

Effective pixels

1628 (H) x 1236 (V)

Pixel pitch4.4μm(H) x 4.4μ (V) (square lattice)
Imaging area7.16mm(H) x 5.44mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate30fps (full pixel readout)
Horizontal drive frequency72.000 MHz
Scanning ratehorizontal: 37.5  KHz
vertical: 30 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
Data base configuration 10bit x 1
clock: 36 MHz x 2 TAP
Resolutionhorizontal: 1200 lines
vertical: 1200 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination7.4 lux, F1.4, max gain, without IR cut filter
S/N ratio45dB
Electronic shutter1/30 to 1/100000 sec
(variable setting)
Gamma1.0
Frame on demandremote setting
(fixed shutter,one trigger and VD reset)
Partial scanselectable start position and width of picture grabbing in 1H step
Offset0 to 128 steps level/10 bit 33steps variable (factory setting: 0 steps level)
Gain setting0 to 12 dB (128 steps variable)
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 270 mA
(approx. 3.3W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)29mm x 29mm x 38mm
 dimensional drawing  		29mm x 29mm x 38mm
 dimensional drawing  
Weightapprox 60g
Rear panelRear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

KP-F500SCL/KP-F500PCL

2/3" progressive scan 5.05 megapixel camera with mini Camera Link           

bulletUltra compact progressive scan 2/3" camera.
bulletHigh resolution with 5.05 million pixels combined with high frame rate. Can be used for high precision and high speed image processing.
bulletMini SDR type Camera Link connector with 12, 10 or 8 bit per pixel output.
bulletFrame rate 16fps. Designed for high resolution inspection.
bulletFrame on demand function
bulletFixed shutter mode
bulletOne trigger mode
bulletVD reset mode
bulletPartial scan.
bulletVariable speed shutter.
bulletThrough the Camera Link interface, various settings such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
 KP-F500SCLKP-F500PCL
Imaging device

CCD 2/3" with progressive scan

Total pixels

2536 (H) x 2068 (V)

Effective pixels

2456 (H) x 2058 (V)

Pixel pitch3.45μm(H) x 3.45μm (V) (square lattice)
Imaging area9.93mm(H) x 8.70mm(V)
Scanning systemprogressive
Aspect ratio4:3
Frame rate16fps (full pixel readout)
Horizontal drive frequency64.000 MHz
Scanning ratehorizontal: 33.264  KHz
vertical: 16 Hz
Synchronizationinternal
Lens mountC mount
(flange focal distance: 17.526mm)
Video output signalsCamera Link
clock: 64 MHz x 1 channel, 32 MHz x 2 channels
Resolutionhorizontal: 2000 lines
vertical: 2000 lines
Sensitivity400 lux, F4, 3200°K
Minimum illumination1.0 lux, F1.4, max gain, without IR cut filter
S/N ratio50dB
Electronic shutter1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 sec
factory setting is off (1/16 sec) or
changeable by variable shutter (min 1/100000 sec)
Gamma1.0
Frame on demandremote setting
fixed shutter,one trigger and VD reset
factory setting is all off
Partial scanselectable start position and width of picture grabbing in 1H step
Power supply12Vdc ±1V12Vdc ±1V
via mini Camera Link
Power consumptionapprox 400 mA
(approx. 4.8W)
Operating ambient0° to +40°C
less than 90%
Storage ambient-10° to +50°C
less than 70%
Vibration endurance98 m/sec² (10 to 60Hz, amplitude: 0.98mm constant/
60 to 200 Hz , amplitude: variable)
(10 to 150 Hz, sweep, 1 min, XYZ, 30 min)
Shock endurance686 m/sec² (drop test, once each top, bottom, left and right)
Dimensions (W x H x D)44mm x 44mm x 41mm
 dimensional drawing  
Weightapprox 110g
Rear panelRear panel
 Remote control
Signal system

1. Control system: start stop synchronization system
2. Transmission rate: 9600 bps
3. Data lenght: 8 bits
4. Start bit: 1
5. Stop bit: 1
6. Parity: none
7. Bit transfer: LSB first

Communications control systemFull control by remote control software, data send/receive by text data transfer to camera microprocessor (BSC system handshake)
Control items1. Shutter speed
2. FD (frame on demand) On/Off
3. Mode:fixed shutter, one trigger
4. Digital output: 8 bit/10 bit/12 bi
5. Gain: 463 steps (1 step approx 0.04 dB)
6. Reset HD: On/Off (factory setting:On)
7. Partial scan
Standard compositioncamera, user's manual
Optional accessories12 pin connector, multi adaptor, dummy glass, 2m, 5m, 10m cables, tripod adaptor

Response curve

response curve

 

Reference technical notes

bulletIntroduction to CCD cameras 
bulletProgressive scan cameras

 

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright ©1998 - 2010 Rapitron s.r.l.
Last modified 22-01-2010
 
HOME PAGE ENGLISH
COMPANY PROFILE
HOT NEWS
OFFERS
INFO
MAILING LIST
SEARCH
 
PRODUCTS RANGE
Security
Surveillance cameras
CCTV lenses
Digital Video Recorders
Monitors
IR and white light lamps
Video signal control devices
Pan & tilts
Housings
Machine vision
Industrial cameras
Machine vision lenses
Lighting for machine vision
Other products
Photographic and medical printers
DISCONTINUED PRODUCTS DATA BANK
 
TECHNICAL NOTES 
Optical calculator