3 CCD color progressive scan

Industrial video
Progressive scan 3-CCD color cameras

Monochrome analog - Monochrome progressive scan - Colour - 3 CCD colour

3 CCD color - Progr.scan 3 CCD

Search

All cameras are supplied without lens, unless otherwise indicated

For these cameras we recommend the use of lenses for 3CCD

HV-F22

Excellent color in image capture

High resolution.

Auto shading correction.

Independent six color adjustment.

Camera functions adjustable through software (shutter, gamma, masking etc.).

IEEE1394 (Vers.1.30)/ Camera Link interfaces.

Features of IEEE1394 version

	Direct PC connection without using a frame grabber board.
	Small diameter cable
	Multiple cameras connectable by use of hub

RGB spectral response

Frame-on-demand

An image can be acquired at a desired timing by external input of a trigger signal.
One-trigger mode
When a single trigger is input, exposure will start at the rising edge of the pulse and will end at the falling edge. Then, V.SYNC will be reset immediately followed by output of the image. Pulse width corresponds to the exposure time.

One trigger mode

HV-F22F

HV-F22CL

HV-F22CL-S1

Resolution

SXGA (1360 x 1024)

Interface

IEEE1394 (ver 1.30)

Camera Link 10 bit

Camera Link 8 bit

Comparison of interfaces

Cable lenght

4.5m

10m

Connector

6 pin (with lock)

26 pin x 2 (medium configuration)
base configuration applicable

Transmissible data volume

400Mpbs

900Mbps (medium configuration)
700Mbps (base configuration)

Remote control

IIDC

CameraLink API

Frame rate

7.5 fps
transmission format

15 fps
transmission format

Rear panel

Pixel clock

28.8 MHz

CCD

1/2"

Imaging area

6.32(H) x 4.76 (V) mm

Effective pixels

1360 (H) x 1024 (V)

Unit cell size

4.65 (H) x 4.65 (V) μm, square pixel

Gain

AGC (0~+12dB)

Trigger

one trigger mode

Shutter

1/100000~1/15~4 sec

Lens

C mount

Lens with back protrusion (T) less than 4mm
The lens must have a protrusion (T) from the flange face less than 4mm to be used with these cameras

Pin configuration

pin configuration

Operating temperature

0C� to +40�C

Vibrations

29 m/sec²(3G)

Shock

490 m/sec²(50G)

Power supply

12Vcc nominal

Consumption

@9W

Dimensions (W x H x D)

65 x 65 x 130mm
dimensional drawing

Weight

@600g

Standard composition

camera
operation manual
sample software (CD-ROM)

Optional accessories

IEEE1394 cable
junction box (JU-M1A)

Applications examples

Detection of uneven printing

Check on fruit damage and ripening

Check on uneven coating and scratches

Observation of cells

Transmission format HV-F22

HV-F22F
Mode		Frame rate	bit/pixel	bit/can
SXGA (1280 x 960)	YUV	7.5	16	8
	RGB		24
VGA (640 x 480)	YUV	30	16
	RGB		24
SXGA (1360 x 1024)	YUV	7.5	16
	RGB		24
	RGB	1.875	48	10

HV-F22CL
Mode		Frame rate	bit/pixel	bit/can
SXGA (1360 x 1024)	RGB	15	30	10

For these cameras we recommend the use of lenses for 3CCD

HV-F31

Excellent color in image capture

High resolution.

Auto shading correction.

Independent six color adjustment.

Camera functions adjustable through software (shutter, gamma, masking etc.).

IEEE1394 (Vers.1.30)/ Camera Link interfaces.

Features of IEEE1394 version

	Direct PC connection without using a frame grabber board.
	Small diameter cable
	Multiple cameras connectable by use of hub

RGB spectral response

Frame-on-demand

One trigger mode

HV-F31F

HV-F31CL

HV-F31CL-S1

Resolution

XGA (1024 x 768)

Interface

IEEE1394 (ver 1.30)

Camera Link 10 bit

Camera Link 8 bit

Comparison of interfaces

Cable lenght

4.5m

10m

Connector

6 pin (with lock)

26 pin x 2 (medium configuration)
base configuration applicable

Transmissible data volume

400Mpbs

900Mbps (medium configuration)
700Mbps (base configuration)

Remote control

IIDC

CameraLink API

Frame rate

7.5 fps
transmission format

15 fps
transmission format

Rear panel

Pixel clock

28.8 MHz

CCD

1/2"

Imaging area

4.76(H) x 4.65 (V) mm

Effective pixels

1024 (H) x 768 (V)

Unit cell size

4.65 (H) x 4.65 (V) μm, square pixel

Gain

AGC (0~+12dB)

Trigger

one trigger mode

Shutter

1/100000~1/30~4 sec

Lens

C mount

Lens with back protrusion (T) less than 4mm
The lens must have a protrusion (T) from the flange face less than 4mm to be used with these cameras

Pin configuration

pin configuration

Operating temperature

0C� to +40�C

Vibrations

29 m/sec²(3G)

Shock

490 m/sec²(50G)

Power supply

12Vcc nominal

Consumption

@9W

Dimensions (W x H x D)

65 x 65 x 130mm
dimensional drawing

Weight

@600g

Standard composition

camera
operation manual
sample software (CD-ROM)

Optional accessories

IEEE1394 cable
junction box (JU-M1A)

Applications examples

Detection of uneven printing

Check on fruit damage and ripening

Check on uneven coating and scratches

Observation of cells

Transmission format HV-F31

HV-F31F
Mode		Frame rate	bit/pixel	bit/can
XGA (1024 x 768)	YUV	15	16	8
XGA (1024 x 768)	RGB	7.5	24
SVGA (800 x 600)	YUV	30	16
SVGA (800 x 600)	RGB	15	24
XGA (1024 x 768)	RGB	3.75	48	10

HV-F31CL
Mode		Frame rate	bit/pixel	bit/can
XGA (1024 x 768)	RGB	30	30	10

HV-F22GV

	Electronic shutter from 10 sec up to 1/100000 or variable.
	Partial scan.
	White balance.
	RGB primary color mosaic filter.
	Square pixels.
	Internal/external syncronization.
	External sync signal VD-and-strobe-output.
	External trigger either via Gig-E interface or external trigger input (12 pin).
	One trigger, restart trigger, partial scan.
	Frame-on-demand function.
	ALC, gain white balance and gamma.
	Adjustable color saturation contrast and brightness. Saturation and hue of of primary colors R,G,B and complementary colors can independently varied.
	Compact and lightweight.
	C mount.

Color camera with Giga Ethernet interface, Gig-E protocol and GeniCam compliant.

Direct connection to PC.

Cable length up to 100 without hub or switcher.

High resolution 1/2" sensor.

High precision digital processing with a high S/N ratio and a wide dynamic range.

Saturation and hue of primary colors R, G, B and complementary colors Cy, Mg, Ye can be independently varied.

Adjustable sharpness width.

Color shading can be automatically corrected.

External trigger function.

4 application files.

Real time automatic white balance function (ATW).

Automatic exposure and automatic level control.

Automatic gain function (AGC), 1 dB step programmable control.

Contrast function.

Flare correction circuit.

Brightness adjustment.

Color bar function.

Negative/positive switching function.

Rear LED indicator.

Easy to use software.

HV-F22GV

Imaging device

3 CCD 1/2" interline transfer (R, G, B)

Total pixels

1434(H) x 1050(V)

Effective pixels

1360(H) x 1024(V)

Pixel size

4.65�m x 4.65�m

Optical system

1/2" f1.6 prism

Scanning area

6.32mm(H) x 4.76mm(V)

Scanning

progressive

Sync system

Internal/external (Hd/Vd automatically switch)

Lens mount

C mount

Video output

Gigabit Ethernet

Protocol

GigE Vision

Transfer rate

1 Gbit/sec

Image format

RGB 8 bit

Image size

1360/H) x 1024(V)

Frame rate

15 fps

Sensitivity

2000 lux, f8, at 1/30 sec

Electric shutter speed

Auto (AES)/Variable/Accumulate

variable

15 sec to 1/100000 sec

AES

15 sec to 1/100000 sec

accumulate

15 sec to 4 sec (1 frame step)

External trigger shutter

mode

fixed shutter, one trigger

ingresso

via Gigabit Ethernet cable(software trigger)
12 pin connector (hardware trigger)

livello ingresso

low: 0 Vdc
high: 3 to 24Vdc

External sync
(strobe out)

5 Vp-p � 0.3V

Screen distortion

all screen: 0% (exept lens characteristics)

Registration

all screen: 0,05% (exept lens characteristics)

Vertical sharpness

2 H

White balance

ATW/Manual/One-push

Gain

auto(0dB to 12dB) or 1 dB step

Gamma

0.45/1.0 (ON/OFF)

Color masking

OFF/ON (6 color independent masking)

Sharpness

sharpness (DTL) level/sharpness (DTL) width

Color bar

full

Power supply

12Vdc (10.5V to 15Vdc without ripple)

Consumption

9.0W (12Vdc)

Ambient temperature

operation

0�C to +40�C

storage

-20�C to +60�C

Vibrations

24.5 m/sec²or less
(10 to 200Hz, 30 minutes each on XYZ axes)
do not apply strong vibration for an extended period of time

Shocks

392 m/sec²or less
(vertical, horizontal, once each face)

Dimensions (W x H x D)

65mm x 65mm x 14mm (not including lens and protrusion)
dimensional drawing

Weight

@600g (without lems)

Supplied accessories

lens mount sheet, power supply/sync connector (HR-10-10P-125), CD-ROM (user manual, driver software)

Optional accessories

cavo LAN (LAN cable(enhanced category 5 or category 6)

Rear panel

Reference technical notes

	Introduction to CCD cameras
	Progressive scan cameras

Cliccate sulle parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
Via S.Antonio Maria Zaccaria 4 - 20122 Milano ITALIA
Tel.: +39 02 659.82.82 Fax: +39 02 65.45.25

P.IVA/VAT No: IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di propriet� dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte cos� come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova