3-CCD colour cameras

Industrial video
3-CCD colour cameras

Reference technical notes

Sentech - Hitachi - Sony - Panasonic - JVC - Pulnix - Watec - TVI

• 3-CCD colour cameras • Colour cameras •

Search

All cameras are supplied without lens, unless otherwise indicated

Altri prodotti correlati:
Obiettivi per telecamere a 3 CCD

KY-F560E

	1/2" high resolution 3 CCD camera.
	Trichromatic prism 3-CCD system for color accuracy..
	High sensitivity (2000 lux at F13).
	Newly developer 12 bit ADC allows an extra high resolution of 850 lines and a S/N ratio of 62 dB (PAL).
	24 bit DSP for dynamic range of more than 400% and near-perfect gamma correction.
	Can be expanded to include 26-pin connector and SDI compatibility with optional boards and studio adapters.
	Remote camera control via SDI interface possible in conjunction with pan & tilt head and system controller.
	Control of main camera parameters.
	Full-time auto white balance system that automatically and continuously adjust white balance over a wide range to ensure stable and accurate color reproduction.
	Automatic light control function (ALC).
	Sophisticated EEI function that uses the variable electronic shutter to reduce sensitivity when the light level is high.
	RS-232C interface.
	1/2" bayonet lens mount.
	Composite output and gen-lock input.
	Squeezed 16:9 mode.
	LOLUX mode (0.7 lux at f1.4).
	Remote control available.

Image device

1/2" interline transfer 3 CCD

Scanning

interlace

Total pixels

470.000 (795H x 582V)

Effective pixels on CCD

440.000 (752H x 582V)

Color separation system

F1.4 RGB trichromatic prism system

Resolution

Y: 850 lines or more

Registration

0.05% or less (excluding lens characteristics)

Minimum illumination

0.7 lux or less (f1.4 LOLUX)

Dynamic range

400% or more

S/N ratio

PAL: >62 dB (before signal processing)

Contour correction

dual edged

Synchronizing system

internal (built-in SSG ) or external (VBS or BB)

Lens mount

1/2" bayonet mount

Analog output signal

1Vp-p, 75Ω

Digital video output

SDI via optional output card or studio adapter

Sensitivity

f13, 2000 lux

Gain

-3dB, 0dB, +3dB, +6BdB, +9dB, +12 dB, +15dB, +18 dB, LOLUX (+30dB)
ALC (0dB to MAX)
PAL: ALC + EEI (0dB to 18dB, approx. 1/50 to 1/200)
V.GAIN (-3dB to +18dB, 0.2dB step)

Electronic shutter

STEP: NORMAL, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (PAL)
V.SCAN: approx. 1/50 to 1/10000 (PAL)
EEI: 1/25 to MAX (PAL)

Dimensions (W x H x D)

70 x 80 x 152.5mm (excluding connectors)

Weight

800 g

Power supply

12Vdc (with adapter)

Consumption

Operating temperature

-5C� to 40�C

Storage temperature

-20�C to +60�C

Optional accessories

lenses*, remote control unit, power supply, studio adapter (with or without SDI), SDI output card, 4" viewfinder, remote control unit, focus control unit*, zoom/servo control unit, intercom headset, pan/tilt head with Tally lamp unit*, pan/tilt controller*, system controller*, camera holder*, autofocus lens controller, RS-232 interface cable, camera remote cable(20m), pan/tilt cable*, camera cable*, lens extension cable*
(* Fujinon)

Rear panel

Applications

The remote camera system allows broadcasting and teleconferencing using high-quality pictures with excellent color reproduction and high speed image transfer

This camera can be used as an ordinary studio camera in combination with one of the studio adapters with varying interfaces.The came for transfer of images to studio editing systems. The choice of the SDI interface enables signal transmission over long distances without degradation.

KY-F70BU

High resolution progressive scan 3-CCD 1/2" SXGA cameras with SCSI output

	3-CCD 1/2" high resolution camera.
	SXGA output available in both digital and analog forms.
	3-CCD prism system for separate processing of R, G and B for perfect colour rendition.
	Square-pixel on chip progressive scan CCDs each with 1.45 million pixels, totalling 4.35 millions.
	1360 x 1024 pixel resolution equates to a 1000 TV lines in horizontal and vertical.
	C mount and 1/2" size fits a large variety of scopes and lenses.
	For infrared applications there is an external access to IR cut filter for replacement by special JVC quartz filter.
	Extended integration up to 4 seconds (slow shutter mode).
	Pixels masking algorithm for optimized image quality.
	Special algorithm for improved S/N ratio.
	User selectable syncs: either separate syncs or sync on green.
	WYSIWYG live preview mode. (live colour preview on VGA monitor).
	External trigger function for Sensor or Flash Synchronization.
	Internal frame memory holds up to four images in uncompressed data format to avoid degradation.
	IEC601-1 and UL-2601 approval, using AA-P700, for use in certain medical applications.
	Shot and Print, Shot and Save capability through SCSI master mode.
	KY-SCSI software package provides camera control and image capturing direct to PC via SCSI-2.
	TWAIN 32 driver for importation of images.
	RS-232C camera control sofware.

Image device

1/2" interline transfer 3-CCD in co-site array

Scanning

progressive

Total pixels

4.35 million (3 x 1.45 million)

Effective pixels for CCD

1392(H) x 1040(V) (1.45 million)

Output pixels

1360(H) x 1024(V) square pixels

Aspect ratio

4:3

Lens mount

Output signal (analog and SCSI)

SXGA 1360 x 1024 pixels 7.5 frames/sec

Preview modes(analog)

VGA: 640 x 480 pixels 60 frames/sec
(image refresh rate 7.5 frames/sec)
VGA: 640 x 480 pixels 60 frames/sec
(image refresh rate 30 frames/sec, vertical resolution: 240 lines)

Digital interface

SCSI-2 50P half-pitch SCSI connector

Analog output

R/G/B 0.7 Vp-p 75 Ω each

Sync output

Hs/Vs 3 Vp-p (low active)

Image memory

5 frames (4 frames in SXGA analog mode)

Sensitivity

ISO100

Quantisation

10 bit in, 8 bit out

White balance

auto and manual

White paint

manual, flare compensation, dynamic shading

Gain

ISO100, 200, 400 (0dB, +6BdB, +12dB)

Electronic shutter

4 sec to 1/2000 sec (in 16 steps); V.SCAN and EEI

Operating temperature

-0C� to 40�C

Power supply

12Vdc

Power consumption

approx 15W

Dimensions (W x H x D)

70 x 80 x 150mm
dimensional drawing

Weight

approx 850 g

Medical approval

IEC601-1 conformed with AA-P700EK/EG
UL-2601 approved with AA-P700MDU

Available software

SCSI direct control & capture software(bundled)
TWAIN 32 capture software (bundled)
RS-232C camera control (free)

System requirements for PC

CPU Pentium 166 Mhz or faster
at least 20Mb of RAM
at least 10Mb of available hard disk
RS-232C serial port
SCSI-2 board (Adaptec AHA-2940AU recommended)
VDU with 16.7 million colours
floppy disk drive
Windows95, Windows98, Windows NT 4.0
TWAIN graphic software (such as Adobe Photoshop)installed

System configurations