3 CCD microcameras

3-CCD remote head camera.

Control unit (GP-US742CUE).

3 types of head:

	1/2" with 800 lines resolution, high sensitivity (GP-US522HBE)
	1/3" progressive scan (GP-US732HE).
	1/4" progressive scan module, heat resistant, OEM version (GP-US742HWE).

Freeze function

2.5 electronic continuous zoom.

2D edge enhancement function (peaking) not measured on frequency.

2 scene files storage for quick call up of either setting.

5 special digital filters for instance to enhance reds or improve contours.

Gamma function improves contrast

6 axis color matrix control. Each color can be adjusted separately.without changing the the white balance of the entire image.

Red enhancement function. Useful for biological research.

On screen display menu.

Sensing area selection to ensure correct exposure.

2-dimensional low-pass filter.

Syncro-scan adjusts the shutter timing for synchronization with a computer display.

Composition

control unit: GP-KS742CUE (cased version)
control unit board: GP-US742CBVE (OEM version uncased)
1/2" head: GP-US522HBE
1/3"head : GP-US732HE
1/4" head: GP-US742HWE (OEM version uncased)

Control unit

GP-US742CUE

Testina

GP-US522HBE

GP-US732HE

System

micro prism system

Pixels

752(H) x 582(V)

Image sensor

1/2" 3 CCD interline transfer

1/3" 3 CCD interline transfer

Scanning

625 lines, 50 fields, 25 frames

625 lines, 50 frames (progressive scan)
625 lines, 50 fields, 25 frames (interlace scan)

Sync system

internal/external (gen lock) switchable
internal: CCIR standard
gen-lock input: VBS, VS, Hd/Vd selectable

Video output

video 1, 2
VBS composite signal 1.0Vpp 75Ω

S-Video (Y/C)
Y =0.7Vpp, 75Ω
C =0.3Vpp, 75Ω

RGB/YPbPr
RGB 0.7Vpp, 75Ω
Y =0.7Vpp, 75Ω
PbPr =0.525Vpp, 75Ω
SYNC=0.3Vpp, 75Ω

Illumination

2000 lux at f16, 3200�K

2000 lux at f13, 3200�K (interlace mode),
2000 lux at f9, 3200�K (progressive mode)

Minimum Illumination

5 lux (f2.8, gain +12dB, 30% level al center)

7 lux (f2.8, gain +12dB, 30% level at center)
(interlace mode)
14 lux (f2.8, gain +12dB, level 30% at center)
(progressive mode)

S/N ratio

62 dB (typical, for Y signal without gain up, enhancer and gamma)

Horizontal resolution

800 lines at center
(Y signal)

750 lines at center
(Y signal)

White balance

manual/AWB/ATW

Black balance

ABC (Automatic Black Balance)/manual

Colour bar

EBU color bar with set-up 0%

Electronic shutter

AUTO: 1/50~1/10000 sec
STEP: 1/50 (OFF), 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 selectable

Gain selection

AGC and gain : on/off

Controls

R gain, B gain and brightness

Computer interface

RS-232C: 9 pin D-sub connector

Lens mount

special C mount

C mount

Power supply

12 Vdc

Power consumption

12W

Operating temperature

0C� to 45C�

Operating humidity

30% to 90%

Dimensions

head: 34(L) x 44 (h) X 52(P)mm
control unit: 170(L) x 44(A) x 227(P)mm
dimensional drawing

Weight

control unit: 110g
head: 1.2g

Front panel controls

white balance ATW/AWC/manual
operation and menu buttons
brightness adjustment
head camera connection
ELC On/Off
scene file 1,2 button
manual increase red/green
color bar button
On/Off
gain high/low/off

Rear panel controls

gen-lock input
VD input
DIP switch for setting
terminals for 12Vdc
interface RS-232
video output RGB/YPbPr
S-video output
video 2 x FBAS output

Optional cables

Accessories

GP-CA522/2P: 4m cable for head-CCU connection
GP-NT12: 12V power supply

System configuration

Main controls

For these cameras we recommend the use of lenses for 3CCD

GP-US932A

3-CCD HDTV remote head camera.

Dynamic range expansion.

HD-SDI % HDMI digital output available.

Digital function built-in.

High definition multi format 16:9, 1080i or 720P selectable.

Resolution 1920 x 1080 pixel (1080i format).

New 16:9 progressive scan CCD sensor with higher sensitivity; + 6dB higher sensitivity CCD compared wioth the original version.

New high sensitivity progressive scan CCD.

New DSP with 14-bit A/D conversion and 19-bit processing.

Excellent color performance: each color can be adjusted separately without changing the white balance of the entire image.

A/D in the head.

Digital transmission through signal cable.

Easy to use on screen display.

3 scene programmable files.

Special expanded dynamic range function.

Low frequency booster.

Complete setup of all parameters.

2.5x electronic zoom and freeze function.

Flip and mirror function.

Control unit :
standard version (cased): GP-US932CUT
OEM board version: GP-US932CBVE

Head: GP-US932HT

Composition

control unit (cased): GP-US932CUT
scheda unit� di comando: GP-US932CBVE (OEM board version)
1/3" camera head: GP-US932HT

Sensor

1/3" progressive scan 3 CCD

System

micro prism system

Syncronization

internal/external

Video format

1080p via HDMI
1080/60i (16:9)
720/60p (16:9)
480/60p (16:9) (4:3 side-cut)
480/60i (4:3 side-cut)

Video output

analog:
RGB/YPbPr (D-sub 9 pin) x 1
Y/C x 1, VBS x 1

digital:
HD-SDI x 2/HDMI x 1

Illumination

2000 lux at f8, 3200�K

S/N ratio

54 dB (typical)

Pixel output

1920 (H) x 1080 (V), 1080i mode
1280 (H) x 720 (V), 720P mode
720 (H) x 480 (V), 480i mode

White balance

manual/AWB/ATW

Electronic shutter

AUTO: 1/60~1/10000 sec
STEP: 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 selectable

Gain selection

AGC or manual gain

Controls

R gain, B gain, brightness, enhance and electrical zoom

Computer interface

RS-232C: D-sub 9 pin connector for command and EVR communication

Lens mount

C mount

Power supply

12 Vdc (10.8V - 13.2V) 4 pin connector

Consumption

12V, 1.5A or less

Operating temperature

0�C to 40�C

Specification assured temperature

10�C to 35�C

Storage temperature

-10�C to 60�C

Operating humidity

from 30% to 85%

Storage humidity

from 30% to 90%

Dimensions

control unit: 170(L) x 44 (h) X 229(P)mm (excluding rubber foot and connector)
head: 37(L) x 47(A) x 54(P)mm (escluso connector and pedestal for tripod)
dimensional drawing

Weight

control unit: 1.2Kg
head: 143g

Power connector

Hirose HR10A-7P-4S (73)
PIN configuration:
PIN 1, 2 (+12v), PIN 3,4 (GND)

Front panel controls and connections

gain: OFF/LOW/HIGH
freeze/menu
selection
camera head connection
up/down connection
left/right menu
D-Range
color bar/white balance
on/off
1/2/3 user setup

Rear panel controls and connections

FBAS video output
sync IN/OUT sync signal
DIP switch
12Vdc power input
RS-232 interface
S-video output
RGB/YPbPr video output
2x SDI video output

Optional cables

20m, 10m, 6m, 4m

Accessories

GP-CA932/4: 4m cable for control unit to camera head connection
GP-CA932/6: 6m cable for control unit to camera head connection
GP-NT12: Alimentatore 12V

Front view

Rear view

System diagram

Connection and optional accessories diagram

Reference technical notes

Introduction to CCD cameras

Industrial videoColour cameras with separate head3 CCD

Industrial video
Colour cameras with separate head
3 CCD