Search

All cameras are supplied without lens, unless otherwise indicated

XC-ES50CE/XC-ES30CE
spectral response
1/2" (XC-ES50CE), 1/3" (XC-ES30CE) image sensor. Ultra small size. C mount. High sensitivity (minimum illumination 0.3 lux). Trigger shutter function with internally generated Vd. Readout on command Reset/restart command. High shock and vibration tolerance. Electronic shutter speed from da 1/4 to 1/8000 sec. Hd/Vd external synchronization system. High S/N ratio (60dB). Regulation: UL, FCC, CE.
	XC-ES50CE	XC-ES30CE
Image device	1/2" interline transfer CCD	1/3" interline transfer CCD
Wavelenght range	400-770nm
Effective picture elements	752(H) x 582(V)
Signal system	CCIR (standard)
Horizontal frequency	15.625 KHz
Vertical frequency	50 Hz
Cell size	8.6(H) x 8.3(V) mm	6.5(H) x 6.25(V) mm
Lens mount	C
Sync system	internal/external (auto)
External sync system	Hd/Vd (2 to 5 Vp-p)
External sync frequency	± 1%
Jitter	less than ± 50ns
Scanning system	2:1 interlaced
Video output	1.0 Vp-p negative, 75 Ω unbalanced
Horizontal resolution	560 TV lines
Sensitivity	400 lux f5.6 (gamma ON, gain MIN, no IR cut filter)	400 lux f4 (gamma ON, gain MIN, no IR cut filter)
Minimum illumination	0.3 lux
S/N ratio	60 dB
Gain	AGC (0-18dB)/manual (0-18dB) selectable
Gamma	ON/OFF
Normal shutter	1/120 to 1/10000 sec
External trigger shutter	1/4 to 1/8000 sec
Connections	12 pins multiconnector configuration
Power supply	12 Vdc (+9 to +16V)
Power consumption	1.6W	1.4W
Dimensions (W x H x D)	29mm x 29mm x 32mm dimensional drawing
Weight	50g
Operating temperature	-10°C to + 50°C
Operating humidity	20% to 80%
Storage temperature	-20°C to + 60°C
Storage humidity	20% to 95%
Vibration	10G (20 to 200 Hz)
Shock resistance	70G
MTBF	126.000 hours
Regulatory compliance	UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories	lens mount cap, user manual
Rear panel

XC-EI50CE/XC-EI30CE
spectral response
1/2" (XC-EI50CE), 1/3" (XC-EI30CE) image sensor. Ultra small size. C mount. Infrared sensitivity. Trigger shutter function with internally generated Vd. Readout on command Reset/restart command. High shock and vibration tolerance. Electronic shutter speed from da 1/4 to 1/8000 sec. Hd/Vd external synchronization system. High S/N ratio (60dB). Minimum illumination: 0.2 lux (XC-EI30CE), 0.1 lux (XC-EI-50CE). Regulation: UL, FCC, CE.
	XC-EI50CE	XC-EI30CE
Image device	1/2" interline transfer CCD	1/3" interline transfer CCD
Wavelenght range	400-880nm
Effective picture elements	752(H) x 582(V)
Signal system	CCIR (standard)
Horizontal frequency	15.625 KHz
Vertical frequency	50 Hz
Cell size	8.6(H) x 8.3(V) mm	6.5(H) x 6.25(V) mm
Lens mount	C
Sync system	internal/external (auto)
External sync system	Hd/Vd (2 to 5 Vp-p)
External sync frequency	± 1%
Jitter	less than ± 50ns
Scanning system	2:1 interlaced
Video output	1.0 Vp-p negative, 75 Ω unbalanced
Horizontal resolution	560 TV lines
Sensitivity	400 lux f11 (gamma ON, gain MIN, no IR cut filter)	400 lux f8 (gamma ON, gain MIN, no IR cut filter)
Minimum illumination	0.1 lux	0.2 lux
S/N ratio	60 dB
Gain	AGC (0-18dB)/manual (0-18dB) selectable
Gamma	ON/OFF
Normal shutter	1/120 to 1/10000 sec
External trigger shutter	1/4 to 1/8000 sec
Connections	12 pins multiconnector configuration
Power supply	12 Vdc (+9 to +16V)
Power consumption	1.6W	1.4W
Dimensions (W x H x D)	29mm x 29mm x 32mm dimensional drawing
Weight	50g
Operating temperature	-10°C to + 50°C
Operating humidity	20% to 80%
Storage temperature	-20°C to + 60°C
Storage humidity	20% to 95%
Vibration	10G (20 to 200 Hz)
Shock resistance	70G
MTBF	126.000 hours
Regulatory compliance	UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories	lens mount cap, user manual
Rear panel

XC-EU50CE
spectral response
1/2" image sensor. Near ultraviolet sensitivity. Ultra small size and lightweight. C mount. Trigger shutter function. Readout on command. Reset/restart command. High shock and vibration tolerance. High MTBF. Electronic shutter speed from da 1/4 to 1/8000 sec. Hd/Vd external synchronization system. High S/N ratio (60dB). Minimum illumination: 0.3 lux. Regulation: UL, FCC, CE.
Image device	1/2" interline transfer CCD
Wavelenght range	300-420nm
Effective picture elements	752(H) x 582(V)
Signal system	CCIR (standard)
Horizontal frequency	15.625 KHz
Vertical frequency	50 Hz
Cell size	8.6(H) x 8.3(V) mm
Lens mount	C
Sync system	internal/external (auto)
External sync system	Hd/Vd (2 to 5 Vp-p)
External sync frequency	± 1%
Jitter	less than ± 50ns
Scanning system	2:1 interlaced
Video output	1.0 Vp-p negative, 75 Ω unbalanced
Horizontal resolution	560 TV lines
S/N ratio	60 dB
Gain	AGC/manual selectable
Gamma	ON/OFF
Normal shutter	1/120 to 1/10000 sec
External trigger shutter	1/4 to 1/8000 sec
Connections	12 pins multiconnector configuration
Power supply	12 Vdc (+9 to +16V)
Power consumption	1.6W
Dimensions (W x H x D)	29mm x 29mm x 32mm dimensional drawing
Weight	50g
Operating temperature	-5°C to + 45°C
Operating humidity	20% to 80% (no condensing)
Storage temperature	-20°C to + 50°C
Storage humidity	20% to 95% (no condensing)
Vibration	10G (20 to 200 Hz)
Shock resistance	70G
MTBF	126.000 hours
Regulatory compliance	UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories	lens mount cap, user manual
Rear panel
Applications	PCB and solder inspection, document proofing, microscopy, medical and cosmetics applications, detail and surface structures detection (small scratches, dust or blemishes, special fluorescent materials

XC-ST30CE/50CE/70CE
1/3" (XC-ST30CE), 1/2" (XC-ST50CE), 2/3" (XC-ST70CE) image sensor. High sensitivity C mount. Trigger shutter function. Readout on command. Reset/restart command. High shock and vibration tolerance. Electronic shutter speed from da 1/4 to 1/8000 sec. Hd/Vd and VS external synchronization system. High S/N ratio. Minimum illumination 0.3 lux. Regulation: UL, FCC, CE.
	XC-ST30CE	XC-ST50CE	XC-ST70CE
Image device	1/3" interline transfer CCD	1/2" interline transfer CCD	2/3" interline transfer CCD
Effective picture elements	752(H) x 582(V)
Signal system	CCIR (standard)
Horizontal frequency	15.625 KHz ± 1%
Vertical frequency	50 Hz
Lens mount	C
Sync system	internal/external (auto)
External sync system	Hd/Vd (2 to 5 Vp-p), VS
External sync frequency	± 1% (horizontal)
Jitter	less than ± 50ns
Scanning system	625 lines, 50 Hz, 2:1 interlaced
Video output	1.0 Vp-p negative, 75 Ω unbalanced
Horizontal resolution	560 TV lines
Sensitivity	400 lux f8 (gamma ON, 0 dB)
Minimum illumination	0.3 lux (f1.4, gamma ON, without IR cut filter)
S/N ratio	54 dB	58 dB
Gain	AGC (0-18dB)/manual (0-18dB)/fixed (0 dB) selectable
Gamma	ON/OFF
Normal shutter	1/120 to 1/10000 sec
External trigger shutter	1/4 to 1/8000 sec
Connections	12 pins multiconnector configuration
Power supply	12 Vdc ± 10%
Power consumption	1.9W	2.0W	2.1W
Dimensions (W x H x D)	44mm x 29mm x 57.5mm dimensional drawing
Weight	110g		105g
Operating temperature	-5°C to + 45°C
Operating humidity	20% to 80%
Storage temperature	-30°C to + 60°C
Storage humidity	20% to 95%
Vibration	10G (20 to 200 Hz)
Shock resistance	70G
MTBF	70.600 hours
Regulatory compliance	UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories	lens mount cap, user manual
Rear panel

XC-ST51CE
1/2" image sensor. High sensitivity C mount. Trigger shutter function. Readout on command. Reset/restart command. High shock and vibration tolerance. Electronic shutter speed from da 1/4 to 1/8000 sec. Hd/Vd and VS external synchronization system. High S/N ratio. Minimum illumination 0.2 lux. Regulation: UL, FCC, CE.
Image device	1/2" interline transfer CCD
Effective picture elements	752(H) x 582(V)
Signal system	CCIR (standard)
Horizontal frequency	15.625 KHz ± 1%
Vertical frequency	50 Hz
Lens mount	C
Sync system	internal/external (auto)
External sync system	Hd/Vd (2 to 5 Vp-p), VS
External sync frequency	± 1% (horizontal)
Jitter	less than ± 50ns
Scanning system	625 lines, 50 Hz, 2:1 interlaced
Video output	1.0 Vp-p negative, 75 Ω unbalanced
Horizontal resolution	560 TV lines
Sensitivity	400 lux f11 (gamma ON, 0 dB)
Minimum illumination	0.2 lux (f1.4, gamma ON, without IR cut filter)
S/N ratio	58 dB
Gain	AGC (0-18dB)/manual (0-18dB)/fixed (0 dB) selectable
Gamma	ON/OFF
Normal shutter	1/120 to 1/10000 sec
External trigger shutter	1/4 to 1/8000 sec
Connections	12 pins multiconnector configuration
Power supply	12 Vdc ± 10%
Power consumption	2.0W
Dimensions (W x H x D)	44mm x 29mm x 57.5mm dimensional drawing
Weight	110g
Operating temperature	-5°C to + 45°C
Operating humidity	20% to 80%
Storage temperature	-30°C to + 60°C
Storage humidity	20% to 95%
Vibration	10G (20 to 200 Hz)
Shock resistance	70G
MTBF	70.600 hours
Regulatory compliance	UL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS4252.2
Supplied accessories	lens mount cap, user manual
Rear panel

 

Reference technical notes
Introduction to CCD cameras

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright ©1998 - 2011 Rapitron s.r.l.
Last modified 03-02-2011