LogoRapitron

Industrial video
Progressive scan colour cameras

Sito in italiano

Reference technical notes

bulletIntroduction to CCD cameras 
bulletProgressive scan cameras

Sentech - Hitachi - Sony - Panasonic - JVC - Pulnix - Watec -  TVI

B/w interlace - B/w progressive - B/n firewire - B/n Camera Link - Intelligent cameras
Color - 3CCD color - Color progressive - Color Camera Link


Search

All cameras are supplied without lens, unless otherwise indicated

 

XCD-V60CR

IEEE1394b progressive scan color camera

bullet1/3" progressive scan  CCD with square pixel.
bulletVGA (640 x 480) sized images.
bullet

IEEE1394.b digital interface with transfer rate up to 800 Mb/sec.

bulletHigh frame rate up to 90 fps.
bulletCameras equipped with two IEEE1394b ports allowing daisy-chain configuration with a large number of cameras (up to 62 units) which can be controlled from a single PC.
bulletBus synchronization function: this function allows users to simultaneously capture images from different angles with multiple cameras by sending a single trigger to all cameras from the host PC. This feature is not only useful for viewing images from different angles, but can be used to recreate a 3D image.
bulletBroadcast delivery function: it can be used to send a software trigger to multiple cameras in a daisy chain. It can also be used to change camera settings such as shutter speed, exposure, white balance, gain etc.
bulletBulk trigger mode: allows the capture of up to 16 images in rapid succession using either a software or hardware trigger. This can be used to capture multiple images of an item at different shutter speeds.
bullet

Equipped with an image buffer used for temporary storage for captured images.

bullet

Vertical and horizontal partial scanning.

bullet

Vertical and horizontal binning. The vertical binning combines image data for every two lines vertically resulting in increased frame rates and reduced processing time. The horizontal binning combines image data for every two pixels horizontalyy to achieve greater sensitivity, faster capture speeds and quicker processing.

bullet

Hardware LUT (Look Up Table)

bullet

Built-in real-time 3x3 image pre-processing filter.

bullet

Low power consumption.

bulletC mount.
bulletUltra compact and lightweight design.
bulletHigh shock and vibration tolerance.
bullet

Meets  IIDC Ver 1.31 specifications

Image device

1/3" progressive scan CCD

Effective pixels

659(H) x 484(V)

Image size640 x 480 (VGA)
Cell size3.75µm x 3.75µm
Resolution depth

raw 8: 8 bits/pixel
raw 16: 10 bits/pixel

Lens mount

C

Digital interfaceIEEE1394.b - 2002x2  bilingual (screw lock possible)
Transfer rate800/400/200/100 Mbps
Frame rate15fps (at full resolution)
Gain controlmanual (0-24 dB), auto gain
Shutter speed

1/100000 to 16sec, auto shutter

External trigger shuttertrigger start (mode 0), trigger start and exposure duration (mode 1)
programmable trigger (via IEEE1394 bus)
trigger inhibit setting
trigger/strobe delay setting
single/bulk trigger mode
Image memory16Mb
Memory channel15 channels for parameter settings

Broadcast delivery

camera setting, software trigger via IEEE1394 bus
Readout featurespartial scanning binning, LUT, Bayer pattern arrangement, AWB
Power supply

8 to 30Vdc  (via IEEE1394b 9-pin cable or 12-pin cable)

Power consumption

typical: 2.8W

Dimensions
(W x H x D)		44mm x 33mm x 57.5mm (not including protruding parts)
Weight140g
Operating temperature -5°C to + 45°C
Storage temperature-30°C to + 60°C
Operating humidity20% to 80% (non condensing)
Storage humidity20% to 95% (non condensing)
Vibrations10G (20 ~ 200 Hz)
Shock resistance70G

 

XCD-SX90CR

1/3" progressive scan color camera SXGA with IEEE1394b interface

bullet1/3" progressive scan CCD with square pixel.
bulletSXGA (1280 x 960) sized images.
bullet

IEEE1394.b digital interface with transfer rate up to 800 Mb/sec.

bulletFrame rate of 30 fps.
bulletCameras equipped with two IEEE1394b ports allowing daisy-chain configuration with a large number of cameras (up to 62 units) which can be controlled from a single PC.
bulletBus synchronization function: this function allows users to simultaneously capture images from different angles with multiple cameras by sending a single trigger to all cameras from the host PC. This feature is not only useful for viewing images from different angles, but can be used to recreate a 3D image.
bulletBroadcast delivery function: it can be used to send a software trigger to multiple cameras in a daisy chain. It can also be used to change camera settings such as shutter speed, exposure, white balance, gain etc.
bulletBulk trigger mode: allows the capture of up to 16 images in rapid succession using either a software or hardware trigger. This can be used to capture multiple images of an item at different shutter speeds.
bullet

Equipped with an image buffer used for temporary storage for captured images.

bullet

Vertical and horizontal partial scanning.

bullet

Vertical and horizontal binning. The vertical binning combines image data for every two lines vertically resulting in increased frame rates and reduced processing time. The horizontal binning combines image data for every two pixels horizontalyy to achieve greater sensitivity, faster capture speeds and quicker processing.

bullet

Hardware LUT (Look Up Table)

bullet

Built-in real-time 3x3 image pre-processing filter.

bullet

Low power consumption.

bulletC mount.
bulletUltra compact and lightweight design.
bulletHigh shock and vibration tolerance.
bullet

Meets  IIDC Ver 1.31 specifications

Image device

1/3" progressive scan CCD

Image size1280 x 960 (SXGA)
Cell size3.75µm x 3.75µm
Resolution depth

raw 8: 8 bits/pixel
raw 16: 10 bits/pixel

Lens mount

C

Digital interfaceIEEE1394.b - 2002x2  bilingual (screw lock possible)
Transfer rate800/400/200/100 Mbps
Frame rate30fps
Gain controlmanual (0-24 dB), auto gain
Shutter speed

1/100000 to 16sec, auto shutter

External trigger shuttertrigger start (mode 0), trigger start and exposure duration (mode 1)
programmable trigger (via IEEE1394 bus)
trigger inhibit setting
trigger/strobe delay setting
single/bulk trigger mode
Image memory16Mb
Memory channel15 channels for parameter settings

Broadcast delivery

camera setting, software trigger via IEEE1394 bus
Readout featurespartial scanning binning, LUT, Bayer pattern arrangement, AWB
Power supply

8 to 30Vdc  (via IEEE1394b 9-pin cable or 12-pin cable)

Power consumption

typical: 2.8W

Dimensions
(W x H x D)		44mm x 33mm x 57.5mm (not including protruding parts)
Weight140g
Operating temperature -5°C to + 45°C
Storage temperature-30°C to + 60°C
Operating humidity20% to 80% (non condensing)
Storage humidity20% to 95% (non condensing)
Vibrations10G (20 ~ 200 Hz)
Shock resistance70G


 

XCD-U100CR

1/1.8" progressive scan color camera UXGA with IEEE1394b interface

bullet1/3" progressive scan CCD with square pixel.
bulletUXGA (1600 x 1200) sized images.
bullet

IEEE1394.b digital interface with transfer rate up to 800 Mb/sec.

bulletFrame rate of 15 fps.
bulletCameras equipped with two IEEE1394b ports allowing daisy-chain configuration with a large number of cameras (up to 62 units) which can be controlled from a single PC.
bulletBus synchronization function: this function allows users to simultaneously capture images from different angles with multiple cameras by sending a single trigger to all cameras from the host PC. This feature is not only useful for viewing images from different angles, but can be used to recreate a 3D image.
bulletBroadcast delivery function: it can be used to send a software trigger to multiple cameras in a daisy chain. It can also be used to change camera settings such as shutter speed, exposure, white balance, gain etc.
bulletBulk trigger mode: allows the capture of up to 16 images in rapid succession using either a software or hardware trigger. This can be used to capture multiple images of an item at different shutter speeds.
bullet

Equipped with an image buffer used for temporary storage for captured images.

bullet

Vertical and horizontal partial scanning.

bullet

Vertical and horizontal binning. The vertical binning combines image data for every two lines vertically resulting in increased frame rates and reduced processing time. The horizontal binning combines image data for every two pixels horizontalyy to achieve greater sensitivity, faster capture speeds and quicker processing.

bullet

Hardware LUT (Look Up Table)

bullet

Built-in real-time 3x3 image pre-processing filter.

bullet

Low power consumption.

bulletC mount.
bulletUltra compact and lightweight design.
bulletHigh shock and vibration tolerance.
bullet

Meets  IIDC Ver 1.31 specifications

Image device

1/1.8" progressive scan CCD

Image size1600 x 1200 (UXGA)
Cell size4.4µm x 4.4µm
Resolution depth

raw 8: 8 bits/pixel
raw 16: 10 bits/pixel

Lens mount

C

Digital interfaceIEEE1394.b - 2002x2  bilingual (screw lock possible)
Transfer rate800/400/200/100 Mbps
Frame ratemax 15fps
Gain controlmanual (0-24 dB), auto gain
Shutter speed

1/100000 to 16sec, auto shutter

External trigger shuttertrigger start (mode 0), trigger start and exposure duration (mode 1)
programmable trigger (via IEEE1394 bus)
trigger inhibit setting
trigger/strobe delay setting
single/bulk trigger mode
Image memory16Mb
Memory channel15 channels for parameter settings

Broadcast delivery

camera setting, software trigger via IEEE1394 bus
Readout featurespartial scanning binning, LUT, Bayer pattern arrangement, AWB
Power supply

8 to 30Vdc  (via IEEE1394b 9-pin cable or 12-pin cable)

Power consumption

typical: 3.0W

Dimensions
(W x H x D)		44mm x 33mm x 57.5mm (not including protruding parts)
Weight140g
Operating temperature -5°C to + 45°C
Storage temperature-30°C to + 60°C
Operating humidity20% to 80% (non condensing)
Storage humidity20% to 95% (non condensing)
Vibrations10G (20 ~ 200 Hz)
Shock resistance70G

 

 
HOME PAGE ENGLISH
COMPANY PROFILE
HOT NEWS
OFFERS
INFO
MAILING LIST
SEARCH
 
PRODUCTS RANGE
Security
Surveillance cameras
CCTV lenses
Digital Video Recorders
Monitors
IR and white light lamps
Video signal control devices
Pan & tilts
Housings
Machine vision
Industrial cameras
Machine vision lenses
Lighting for machine vision
Other products
Photographic and medical printers
DISCONTINUED PRODUCTS DATA BANK
 
TECHNICAL NOTES 
Optical calculator

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

© Rapitron s.r.l.  -  1998-2012

NEW ADDRESS/NUOVO INDIRIZZO
Via S. Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
Tel.: +39 02 659.82.82     Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova