Search

 

KP-160/KP-161
spectral response characteristics  The specifications of this product appear as a reference only, as it has been discontinued
High sensitivity in the near infrared region by removing the IR cut filter. Dynamic white suppress circuit to get a high quality picture with a proper white level even for highly contrasted scenes. Connector for auto iris lenses.
These cameras have been replaced by new models KP-200 and KP-201.	KP-160	KP-161
Imaging device	1/2" interline transfer CCD
Pixels	732(H) x 580(V) total 699(H) x 576(V) effective
Scanning	2: 1 interlace, non interlace (only with ext. sync.)
Syncronization	Internal (non line-lock)/external
Resolution at center	570(H), 350 (V)
S/N ratio	46 dB (gamma=1, normal gain)
Illumination	standard: 400 lux (f/8, 2850 °K) minimum: 0.25 lux (30IRE); 0.5 lux with AGC=ON, gamma=ON, f1.4, 90% reflection
Video output	1Vp-p video composite, 75 ohm, Negative sync (BNC)
Output for autoiris lenses	Video signal: 0.7Vp-p, high impedance power supply 9Vcc, 35mA max
Sync output signals	Fh/Vd/Sync: 5Vp-p high impedance
Sync signal input	Hd: 4Vp-p, 75 ohm Vd: 4Vp-p, 75 ohm Composite (VS): 1Vp-p 75 ohm, negative sync
AGC	ON/OFF
Gamma	0.45/1.0 selectable
Temperature and humidity	full specification: 0°C to 40°C, 50% to 70% RH operating: -10°C to 50°C, 90% or less RH storage: -20°C to 60°C, 70% or less RH
Lens mount	C
Power supply	12Vdc +-1V	220/240 Vac, 50 Hz
Dimensions (W x H x L)	56mm x 53mm x 84mm dimensional drawing	56mm x 53mm x 164mm dimensional drawing
Weight	450g	1,1Kg

 

KP-201K
spectral response characteristics  The specifications of this product appear as a reference only, as it has been discontinued
Compact and lightweight camera. High sensitivity in the near infrared region (max sensitivity of CCD at @600 nm). High sensitivity and high resolution
Imaging device	1/2" interline transfer CCD
Pixels	795(H) x 596(V) total 752(H) x 582(V) effective
Cell size	8.6µm x 8.3µm
Scanning	CCIR 2: 1 interlace 625 lines, 50 Hz (EIA format model available on request)
Syncronization	Internal/external (optional)
S/N ratio	48 dB
Illumination	standard: 200 lux (f4.0) minimum: 0.0002 lux with AGC=ON, gamma=ON, f1.4
TV resolution	570(H) x 485(V) lines
Video output	1Vp-p video composite, 75 ohm negative sync
Electronic shutter	8 fixed speeds from 1/50 to 1/100.000 sec AES (automatic electronic shutter)
Output for autoiris lenses	yes
Gain	fixed/AGC
Gamma	0.45/1.0 selectable
Temperature and humidity	operating: -10°C to 50°C, 90% or less RH storage: -20°C to 60°C, 70% or less RH
Resistance to vibrations	3G at 10 to 55Hz, 30 minutes each X,Y and Z axes
Lens mount	C/CS
Power supply	230 Vac, 50 Hz
Dimensions (W x H x L)	64mm x 55mm x 122mm dimensional drawing
Weight	620g
Standard composition	Camera and operation manual

 

KP-M32AP
The specifications of this product appear as a reference only, as it has been discontinued
Compact lightweight high resolution (560 TV lines) 1/3"  camera. Eight-step electronic shutter function from 1/120 sec to 1/10.000 sec. Internal/external sync. Field-on-demand function. Resistant to vibrations. New sensor
Imaging device	1/3" interline transfer CCD
Total pixels	795(H) x 596(V)
Effective pixels	752(H) x 582(V)
Unit cell size	6.5(H) x 6.25(V) µm
Imaging area	4.89mm x 3.64mm
Scanning	CCIR  2: 1 interlace, 625 lines (EIA standard available)
Lens mount	C
Horizontal scanning frequency	15.625 KHz
Vertical scanning frequency	50 Hz
Syncronization	Internal/external (automatically switchable)
External sync input	Hd/Vd: 2 to 6Vp-p, negative polarity Input impedance: 1Kohm frequency deviation: ± 1%
Video output	1Vp-p video composite, 75 ohm Video component: 0.7 Vp-p Sync component: 0.3 Vp-p (negative polarity)
Resolution	560(H), 575 (V)
Illumination		standard: 400 lux (f5.6, 3200 °K) minimum: 0.5 lux, f1.4 with AGC=ON, gamma=0.45 without IR filter
S/N ratio	56 dB
Electronic shutter	1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/120 sec  OFF: normal exposure selectable by external switch
Integration	Frame or field selectable
Gamma	1.0 or correction, selectable by internal switch
AGC	FIX/AGC/MANUAL selectable by external switch Set to FIX at factory
Field-on-demand function	activated by external trigger signal
Power supply	12Vdc ±1V
Temperature and relative humidity	operating: -10°C to 60°C, 90% or less storage: -20°C to 60°C, 70% or less
Vibration resistance	98 m/sec2 (10 to 60 Hz, amplitude: constant at 0.98mm; 60 to 200 Hz: constant acceleration, constant amplitude) 10 to 200 Hz, sweeping for one minute for 30 min each of  X,Y,Z directions
	686 m/sec2 (top, bottom, left and right once each)
Power consumption	@120 mA
Dimensions (W x H x D)	29mm x 29mm x 62mm  dimensional drawing
Weight	100g
Standard composition	camera, operation manual
Optional accessories	Tripod adaptor (TA-F3), 12 pins connector (HR12A-10P-12S(01)), power supply (AP-130), Junction box (JU-M1A),  camera cables, dummy glass

 

KP-M2R
spectral response characteristics The specifications of this product appear as a reference only, as it has been discontinued
Camera operating in the near infrared spectrum. Compact lightweight high resolution 1/2" camera. Eight-step electronic shutter function. Internal/external sync, interlace/non interlace capabilities. Field-on-demand function. Frame and field integration modes. Resistant to vibrations.
Imaging device	1/2" interline transfer CCD
Total pixels	795(H) x 596(V)
Effective pixels	752(H) x 582(V)
Unit cell size	8.6 (H) x 8.3(V) µm
Imaging area	6.47mm x 4.83mm
Scanning	EIA 2: 1 interlace,
Lens mount	C
Horizontal scanning frequency	15.625 KHz
Vertical scanning frequency	60 Hz
Syncronization	Internal/external (automatically switchable)
External sync input	Hd/Vd: 2 to 6Vp-p, negative polarity Input impedance: 1Kohm frequency deviation: ± 1%
Number of horizontal lines allowable for external syncronization	2:1 interlace CCIR: 621 to 2047 lines/2FLD,1FLD (61 to 15Hz) non interlace CCIR: 310 to 1023 lines/1FLD, 1FLD (51 to 15Hz)
Video output	1Vp-p video composite, 75 ohm Video component: 0.7 Vp-p Sync component: 0.3 Vp-p (negative polarity)
Resolution	560(H), 575 (V)
Illumination	standard: 30 lux (f4, 3200 °K) minimum: 0.3 lux, f1.4 with AGC=ON, gamma=ON
S/N ratio	56 dB
Electronic shutter	1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/120, 1/50 sec   OFF: normal exposure selectable by external switch factory setting: OFF
Integration	Frame or field selectable by external switch factory setting: frame
Gamma	1.0 or correction, selectable by internal switch factory setting: fixed
AGC	fixed gain/AGC selectable by internal switch factory setting: fixed gain
Field-on-demand function	ON/OFF selectable by internal switch factory setting: OFF
Reset/restart function	ON/OFF with chip component switch factory setting: OFF
Power supply	12Vdc ±1V
Temperature and relative humidity	operating: -10°C to 50°C, 90% or less storage: -20°C to 60°C, 70% or less
Vibration resistance	9G max (10 to 60 Hz, amplitude: constant at 0.98mm), 7G constant (60 to 200 Hz, amplitude: variable) 10 to 200 Hz, sweeping for one minute for 30 min each of  X,Y,Z directions
Power consumption	@180 mA
Dimensions (W x H x D)	44mm x 29mm x 72mm  dimensional drawing
Weight	120g
Standard composition	camera,  operation manual

Optional accessories	SG1201/JMH0110	12V power supply with connector
	JMH0110	12 pin connector
	TA-M1	Tripod adapter
	JU-M1A	Junction unit
	C-201KSM	2m cable
	C-501KSM	5m cable
	C-102KSM	10m cable

 

KP-M22AP
The specifications of this product appear as a reference only, as it has been discontinued
Compact lightweight high resolution (560 TV lines) 1/2"  cameras. Eight-step electronic shutter function from 1/120 sec to 1/10.000 sec. Internal/external sync. Field-on-demand function. Resistant to vibrations. New sensor
Imaging device	1/2" interline transfer CCD
Total pixels	795(H) x 596(V)
Effective pixels	752(H) x 582(V)
Unit cell size	8.6 (H) x 8.3(V) µm
Imaging area	6.47mm x 4.83mm
Scanning	CCIR  2: 1 interlace, 625 lines (EIA standard available)
Lens mount	C
Horizontal scanning frequency	15.625 KHz
Vertical scanning frequency	50 Hz
Syncronization	Internal/external (automatically switchable)
External sync input	Hd/Vd: 2 to 6Vp-p, negative polarity Input impedance: 1Kohm frequency deviation: ± 1%
Video output	1Vp-p video composite, 75 ohm Video component: 0.7 Vp-p Sync component: 0.3 Vp-p (negative polarity)
Resolution	560(H), 575 (V)
Illumination	standard: 400 lux (f8, 3200 °K) minimum: 0.3 lux, f1.4 with AGC=ON, gamma=0.45 without IR filter
S/N ratio	56 dB
Electronic shutter	1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/120 sec  OFF: normal exposure selectable by external switch
Integration	Frame or field selectable
Gamma	1.0 or correction, selectable by internal switch
AGC	FIX/AGC/MANUAL selectable by external switch Set to FIX at factory
Field-on-demand function	activated by external trigger signal
Power supply	12Vdc ±1V
Temperature and relative humidity	operating: -10°C to 60°C, 90% or less storage: -20°C to 60°C, 70% or less
Vibration resistance	98 m/sec2 (10 to 60 Hz, amplitude: constant at 0.98mm; 60 to 200 Hz: constant acceleration, constant amplitude) 10 to 200 Hz, sweeping for one minute for 30 min each of  X,Y,Z directions
	686 m/sec2 (top, bottom, left and right once each)
Power consumption	@120 mA
Dimensions (W x H x D)	29mm x 29mm x 62mm  dimensional drawing
Weight	100g
Standard composition	camera, operation manual

Optional accessories	AP-130	12V power supply with connector
	HR10A-10P-12S(01)	12 pin connector
	TA-F3	Tripod adapter
	JU-M1A	Junction unit
	C-201KSM	2m cable
	C-501KSM	5m cable
	C-102KSM	10m cable
		dummy glass

 

KP-200P
spectral response characteristics  The specifications of this product appear as a reference only, as it has been discontinued
Compact and lightweight camera. High sensitivity in the near infrared region (max sensitivity of CCD at @600 nm). High sensitivity and high resolution
Imaging device	1/2" interline transfer CCD
Pixels	795(H) x 596(V) total 752(H) x 582(V) effective
Cell size	8.6µm x 8.3µm
Scanning	CCIR 2: 1 interlace 625 lines, 50 Hz (EIA format model available on request)
Syncronization	Internal/external (optional)
S/N ratio	48 dB
Illumination	standard: 200 lux (f4.0) minimum: 0.0002 lux with AGC=ON, gamma=ON, f1.4
TV resolution	570(H) x 485(V) lines
Video output	1Vp-p video composite, 75 ohm negative sync
Electronic shutter	8 fixed speeds from 1/50 to 1/100.000 sec AES (automatic electronic shutter)
Output for autoiris lenses	yes
Gain	fixed/AGC
Gamma	0.45/1.0 selectable
Temperature and humidity	operating: -10°C to 50°C, 90% or less RH storage: -20°C to 60°C, 70% or less RH
Resistance to vibrations	3G at 10 to 55Hz, 30 minutes each X,Y and Z axes
Lens mount	C/CS
Power supply	12Vdc +-1V
Dimensions (W x H x L)	64mm x 55mm x 122mm dimensional drawing
Weight	450g
Standard composition	Camera and operation manual

 

KP-M30P
The specifications of this product appear as a reference only, as it has been discontinued
1/2" (KP-M20) and 1/3" (KP-M30) ultra compact cameras with high resolution and high sensitivity. Hd/Vd input output. Electronic shutter
Imaging device	1/3" interline transfer CCD
Total pixels	795(H) x 596(V)
Effective pixels	752(H) x 582(V)
Horizontal scanning frequency	15.625 KHz
Vertical scanning frequency	50 Hz
Pixel clock	14.187 MHz
Video output	1Vp-p video composite, 75 ohm
Gamma	ON (0.45), OFF (1)
Shutter	1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec
Lens mount	C
Power consumption	@1.5W
Power supply	12Vdc ±1V
Dimensions (W x H x D)	29mm x 29mm x 38.5mm  dimensional drawing
Weight	55g
Pin configuration	pin configuration

Optional accessories	SG1201/JMH0110	12V power supply with connector
	JMH0110	12 pin connector
	TA-M1	Tripod adapter
	JU-M1A	Junction unit
	C-201KSM	2m cable
	C-501KSM	5m cable
	C-102KSM	10m cable

 

 

Reference technical notes
Introduction to CCD cameras

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright 1998 - 2011 Rapitron s.r.l.
Last modified 25-10-2011