LogoRapitron

Sito in italianoDiscontinued products      
Industrial video
Progressive scan black/white cameras

Reference technical notes

bulletIntroduction to CCD cameras 
bulletProgressive scan cameras

All cameras are supplied without lens, unless otherwise indicated

XCD-SX900/XCD-X700


Progressive scan b/w camera

The specifications of this product appear as a reference only, as it has been discontinued

bulletProgressive scan 1/2" CCD.
bulletSquare pixels.
bulletHigh resolution video format: SXGA (1280(H) x 960(V)) for XCD-SX900; XGA (1024(H) x 768(V)) for XCD-X700.
bulletC mount.
bulletContinuous output mode;  XCD-SX900: 7.5 fps, 3.75 fps; XCD-X700: 15 fps, 7.5 fps.
bulletExternal trigger output mode.
bulletIEEE1394-1995 interface format.
bulletAsyncronous shutter, external trigger.
bulletData rate : 400, 200, 100 Mb/sec
bulletBNC external trigger connector.
bullet6 pin IEEE1394 connector.
bulletHigh shock and vibration tolerance.
bulletRobust and compact size.
 XCD-SX900XCD-X700
Image device

1/2" interline transfer CCD

Effective picture elements

1.450.000: 1392(H) x 1040(V)

800.000: 1034(H) X 779(V)

Video formatSXGA (1280 X 960)XGA (1024 X 768)
Cell size4.65(H) x 4.65(V) m6.25(H) x 6.25(V) m
Lens mount

C

Minimum illumination4 lux (f 1, gain + 18dB)
Digital interfaceIEEE1394
Transfer rate400 Mbps
Frame rate7.5 or 3.75 fps15 or 7.5 fps
Gain controlmanual (0-18 dB)
External shutter1/100.000 - 2 sec
External trigger shutteryes
Partial scan16 zones (4 x 4)
Power requirements 8 to 30 Vdc
Power consumption3.0W
Dimensions
(W x H x D)		44mm x 33mm x 116mm
dimensional drawing 
Weight250g
Operating temperature-5C to + 45C
Storage temperature-30C to + 60C
Vibration10G (20 to 200 Hz)
Shock resistance70G
RegulationsUL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS/NZS3548/95 Class A
Supplied accessorieslens mount cap, operating instructions, cable, clamp filter
Optional accessories PCI Lynks II host adaptor card with Windows NT 4.0 driver included

 

XCD-SX900UV


B/w progessive scan camera with UV sensitivity
The specifications of this product appear as a reference only, as it has been discontinued

bulletProgressive scan 1/2" CCD.
bulletNear ultra-violet sensitivity  from 250 to 380 wavelenght.
bulletSquare pixels.
bulletHigh resolution video format: SXGA (1280(H) x 960(V)).
bulletC mount.
bulletContinuous output mode: 7.5 fps, 3.75 fps.
bulletExternal trigger output mode.
bulletIEEE1394-1995 interface format.
bulletAsyncronous shutter, external trigger.
bulletData rate : 400, 200, 100 Mb/sec
bulletBNC external trigger connector.
bullet6 pin IEEE1394 connector.
bulletHigh shock and vibration tolerance.
bulletRobust and compact size.
Image device

CCD 1/2"

Effective picture elements

1.450.000: 1392(H) x 1040(V)

Video formatSXGA (1280 X 960)
Cell size4.65(H) x 4.65(V) m
Lens mount

C

Digital interfaceIEEE1394
Transfer rate400 Mbps
Frame rate7.5 or 3.75 fps
Gain controlmanual (0-18 dB)
External shutter1/100.000 - 16 sec (image guarantee up to 2 sec)
External trigger shutterYes
Partial scan16 zones (4 x 4)
Power requirements 8 to 30 Vdc
Power consumption3.0W
Dimensions
(W x H x D)		44mm x 33mm x 116mm
dimensional drawing 
Weight250g
Operating temperature-5C to + 45C
Storage temperature-30C to + 60C
Vibration10G (20 to 200 Hz)
Shock resistance70G
RegulationsUL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1 + AS/NZS3548/95 Class A
Supplied accessorieslens mount cap, operating instructions, cable

 

XCD-SX910/XCD-X710


Progressive scan b/w camera

The specifications of this product appear as a reference only, as it has been discontinued

bulletProgressive scan 1/2" or 1/3" CCD.
bulletSquare pixels.
bulletHigh resolution video format: SXGA (1280(H) x 960(V)) for XCD-SX910; XGA (1024(H) x 768(V)) for XCD-X710.
bulletC mount.
bulletSelectable frame rate: XCD-SX910 up to 15 fps; XCD-S710 up to 30 fps.
bullet8 bit (Mono8) or 10-bit (Mono16) output.
bulletBinning function (2 x 1, 2 x 2).
bulletPartial scan (16 x 16 selectable zones).
bulletExternal trigger output mode.
bulletFrame memory.
bulletIEEE1394-1995 interface format.
bulletAuto/manual gain
bulletAsyncronous shutter, external trigger.
bulletBNC external trigger connector.
bullet6 pin IEEE1394 connector.
bulletHigh shock and vibration tolerance.
bulletRobust and compact size.
 XCD-SX910XCD-X710
Image device

1/2" interline transfer CCD

1/3" interline transfer CCD

Effective picture elements

1.450.000: 1392(H) x 1040(V)

800.000: 1034(H) X 779(V)

Video formatSXGA (1280 X 960)
max 1376 x 1024		XGA (1024 X 768)
Cell size4.65(H) x 4.65(V) m6.25(H) x 6.25(V) m
Lens mount

C

Minimum illumination4 lux (f 0.95 lens open, + 18dB gain)
Digital interfaceIEEE1394-1995
Pin configurationpin configuration
Transfer rate400/200 Mbps
Frame rate15/7.5/3.75/1.875 fps30/15/7.5/3.75/1.875 fps
Gain controlauto/manual (0-24 dB, 0.035 steps)
BrightnessSoftware block level adjustment
External shutter1/100.000 - 17.5 sec
External trigger shuttertrigger start (mode 0), trigger start and exposure duration (mode 1)
Partial scan256 zones (16 x 16)
Power requirements 8 to 30 Vdc (from IEEE1394 cable)
Power consumption4.5W
Dimensions
(W x H x D)		44mm x 33mm x 116mm
dimensional drawing 
Weight250g
Operating temperature-5C to + 45C
Storage temperature-30C to + 60C
Operating humidity20 % to 80% (non condensing)
Storage humidity20% to 90% (non condensing)
Vibration10G (20 to 200 Hz)
Shock resistance70G
RegulationsUL60950 listed, FCC Class B Digital Device, CE (EN61326)
Supplied accessorieslens mount cap, operating instructions, cable, clamp filter
Optional accessories tripod adaptor, 50mm macro lens
Rear panelRear panel

 

XCD-SX910UV


UV sensitive progressive scan monochrome camera

The specifications of this product appear as a reference only, as it has been discontinued

bulletUltraviolet sensitivity (below 200 to 380 nm); can capture clear images of minute surface detail when used with UV illumination systems.
bulletProgressive scan 1/2" CCD.
bulletSquare pixels.
bulletHigh resolution video format: SXGA (1280(H) x 960(V)).
bulletC mount.
bulletContinuous output 15 fps 7.5 fps, 3.75 fps, 1.875 fps.
bullet8 bit (Mono8) or 10-bit (Mono16) output.
bulletBinning function (2 x 1, 2 x 2).
bulletPartial scan (16 x 16 selectable zones).
bulletExternal trigger output mode.
bulletFrame memory.
bulletIEEE1394-1995 interface format.
bulletAuto/manual gain
bulletAsyncronous shutter, external trigger.
bulletBNC external trigger connector.
bullet6 pin IEEE1394 connector.
bulletHigh shock and vibration tolerance.
bulletRobust and compact size.
Image device

1/2" interline transfer CCD

Effective picture elements

1.450.000: 1392(H) x 1040(V)

Video formatSXGA (1280 X 960)
max 1376 x 1024
Cell size4.65(H) x 4.65(V) m
Lens mount

C

Minimum illumination4 lux (f 0.95 lens open, + 18dB gain)
Digital interfaceIEEE1394-1995
Pin configurationpin configuration
Transfer rate400/200 Mbps
Frame rate15/7.5/3.75/1.875 fps
Gain controlauto/manual (0-24 dB, 0.035 steps)
BrightnessSoftware block level adjustment
External shutter1/100.000 - 17.5 sec
External trigger shuttertrigger start (mode 0), trigger start and exposure duration (mode 1)
Partial scan256 zones (16 x 16)
Power requirements 8 to 30 Vdc (from IEEE1394 cable)
Power consumption4.5W
Dimensions
(W x H x D)		44mm x 33mm x 116mm
dimensional drawing 
Weight250g
Operating temperature-5C to + 45C
Storage temperature-30C to + 60C
Operating humidity20 % to 80% (non condensing)
Operating humidity20% to 90% (non condensing)
Vibration10G (20 to 200 Hz)
Shock resistance70G
RegulationsUL60950 listed, FCC Class B Digital Device, CE (EN61326)
Supplied accessorieslens mount cap, operating instructions, cable, clamp filter
Optional accessories tripod adaptor, 50mm macro lens
Rear panelRear panel
Applicationssemiconductor inspection, ultraviolet microscopy, , FA precision inspection and surface inspection

 

XC-7500/XC8500CE

XC-7500    1/2" b/w progressive scan camera EIA                    1/2" b/w progressive scan camera CCIR   XC-8500CE
The specifications of this product appear as a reference only, as it has been discontinued

bullet1/2" Hyper Had progressive scan CCD
bulletSquare pixels.
bulletFrame shutter:
bulletnormal: 1/60~1/10000 sec, 1/50~1/10000 sec.
bulletE-Donpisha:
bulletlow speed: ∞ ~ ca 1/60 sec,∞ ~ca 1/50 sec
bulletnormal speed: 1/1000~1/11000 sec, 1/1000~1/10000 sec
bullethigh speed: 1/10000~1/100000 sec
bulletexternal control: ∞ ~ 1/60 ~/10000 sec, ∞ ~ 1/60 ~/10000 sec
bulletThree mode outputs:
bulletinterlace (1/60 sec, 1/50 sec) ~ 2I mode
bulletnon interlace: (1/60 sec, 1/50 sec) ~ 2N mode
bulletnon interlace: (1/30 sec, 1/25 sec) ~1N mode
bulletRestart-reset function (trigger input).
 XC-7500XC-8500CE
Pick up device

1/2" interline transfer  Hyper Had CCD

Pixels

659(H) x 494(V)

782(H) x 582(V)

Cell size9.9(H) x 9.9(V) m8.3(H) x 8.3(V)m
Signal systemsEIA/VGACCIR/SVGA
Lens mountC mount
Horizontal frequency15.734 KHz15.625 KHz
Vertical frequency59.94 Hz50 Hz
Sincronizationinternal/external (auto)
External syncHd/Vd (4.0Vp-p), VS or SINC (0.3Vp-p)
External sync allowancefrequency deviation   1%
Video out2I: interlace 2:1  (1/60 sec)
2N: non interlace (1/60 sec)
1N: non interlace (1/30 sec)		2I: interlace 2:1  (1/50 sec)
2N: non interlace (1/50 sec)
1N: non interlace (1/25 sec)
Horizontal resolution500 TV lines580 TV lines
Vertical resolution485 TV lines575 TV lines
S/N ratio60 dB (200 kHz~4.2 MHz)58dB(200 KHz~5.0 MHz)
Sensitivity400 lux, f4
Minimum illumination3 lux f1.4, AGC ON ( with IR cut filter)
Power supply+10.5 to + 15Vcc
Power consumption2.5W
Normal shutteroff, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec, flickerless
E-DONPISHAnormal speed1/1000, 1/2000, 1/4000, 1/6000, 1/8000, 1/10000, 1/11000 sec (XC-7500 only)
another speed can be selected by internal SW
high speed1/10000~1/100000
low speed∞ ~ approx 1/60 sec∞ ~ approx 1/50 sec
external control∞ ~ 1/60 sec ~ 1/10000 sec ∞ ~ 1/60 sec ~ 1/10000 sec
External triggerpolarity +/-, trigger  width (2~10m sec), input impedance 10kΩ
GammaON (γ=0.45)/OFF (γ=1) internal switch selection
Rear panelrear switches and connectors
GainAGC (0 to +18dB)/fixed (0dB)/manual (0 to +18dB)
factory setting: fixed same level
Frequency responsespectral response curve
Dimensions
(W x H x D)		44 x 44 x 70mm 
dimensional drawing
Weight190g
Temperature on performance0~40C
Operating temperature-5~45C
Operating moisture25%~80%
Storage temperature-25~60C
Storage moisture20%~90%
Vibration resistance7G (11~200 Hz) 3 directions
Stock resistance70G
MTBF83400 hpours
RegulationsUL, FCC, CE

CMA-87
(Optional memory adapter)

Optional memory adapter

The specifications of this product appear as a reference only, as it has been discontinued

bulletto enable a trigger frame shutter (E-DONPISHA) control function.
bulletto enable signal format conversion function
bulletto enable high rate scanning function
Video input/output signal12P/IN(VIDEO1, 2, 1-0Vp-p, 75Ω), D-sub 15P/OUT(VGA/SVGA),
12P/OUT (1.0Vp-p, 75Ω)
External input/output signalTRIG IN (High, +2.0~5.0Vp-p), WEN OUT (High, 5.0Vp-p), CTL OUT
Sync input/output signalHd/Vd IN(+2.0~5.0Vp-p, 75Ω), Hd/Vd OUT (4.0~5.0Vp-p, High)
Scanning conversionXC-7500(EIA/VGA/CCIR), XC-8500CE(CCIR/SVGA/EIA)
High rate scanx1.5, 2, 3, 4
Sports mode1/100 sec x 2 (XC-8500CE only)
Shutter controlE-DONPISHA ∞~1/100000 sec (low speed, middle speed,normal speed, high speed, trigger through)
Power requirements10.5 ~15Vdc
Power consumption2.4W
Dimensions (W x H x D) 135.4 x 30 x 69mm
dimensional drawing
Weight295g

 

XC-HR300

1/2" progressive scan high speed camera

The specifications of this product appear as a reference only, as it has been discontinued

bullet1/3" progressive scan.
bulletSVGA resolution.
bulletSquare pixels.
bulletC mount.
bulletQuad speed.
bulletTwo output modes:
bullet100 Hz interlaced scanning (2I)
bullet50 Hz progressive scanning (1N)
bulletFrame shutter (1/4 to 1/25000 sec).
bulletAsyncronous frame shutter.
bulletHigh frame rate with partial scan feature.
bullet400 frames/sec (2I)
bullet200 frames/sec (1N)
bulletHd/Vd external syncronization system.
bulletCompact size.
bulletRugged construction with a vibration and shock resistant structure.
bulletMinimum illumination: 6 lux (max gain f1.4).
bulletHigh S/N ratio: 58 dB (2I mode).
bulletRegulation: UL, FCC, CE.
Image device

 1/2" interline transfer progressive scan CCD

Effective pixels

782(H) x 582(V)

CCD horizontal drive frequency29.5 MHz
CCD vertical drive frequency31.25 KHz
Cell size8.3m x 8.3m
Effective sensing area6.49mm (H) x 4.83mm (V)
Lens mount

C

Scanning

625 lines
1N mode (1 video output)
2I mode (2 video output)

Sync system

internal/external (switched automatically)

Evternal sync system

Hd/Vd (2 to 5 Vp-p)
input signal automatically detected when switch on rear panel in EXT mode

Video output

non interlace, 1 Vp-p, negative sync, 75 Ω

Horizontal resolution

600 TV lines

Minimum illumination

6.0 lux (f1.4, gamma off, gain +18dB)

S/N ratio

58 dB (with 2I mode, 0 dB gain)

Shutter

normal: OFF to 1/25000 sec with external trigger shutter mode,
 1/4 to 1/100000 with switches or trigger pulse width

Gain controlfixed (0 dB), manual (0-18 dB), 1/4 to 1/100000 sec
Gammaoff (fixed)
Output connectorDC IN, SYNC, VIDEO, multi  12 pin
Power supply12 Vdc (+10.5V ~ +15.0V)
Power consumption4.0W
Operating temperature -5C to + 45C
Storage temperature-30C to + 60C
Operating humidity20% to 80% (no condensation)
Storage humidity20% to 95% (no condensation)
Shock resistance70G
Vibration10G (20 ~ 200 Hz)
Dimensions
(W x H x D)		44mm x 33mm x 75mm
dimensional drawing
Weight175g
RegulationsUL 1492, CC Class A Digital Device, IC Class A Digital Device, CE (EN50081-2 + EN50082-2),  EMC AS3548 (Classe A).
Rear panelRear panel

 

XC-55/XC-55B

XC-55    1/3" b/w progressive scan camera                    1/3" b/w progressive scan camera with remote head   XC-55BB

The specifications of this product appear as a reference only, as it has been discontinued

bullet1/3" progressive scan CCD.
bulletSquare pixels.
bulletC mount (XC-55), NF mount (XC-55BB).
bulletRemote head version (XC-55BB).
bulletAlternative shutter modes:
bulletnormal shutter (up to 1/8000 sec)
bulletE-Donpisha II asyncronous frame shutter (1/4 to 1/100000 sec).
bulletOutput selectable between EIA and non-interlace progressive scan.
bulletRestart/reset mode.
bulletMinimum illumination: 0.5 lux (f1.4 max gain)
bulletHigh S/N ratio: 56 dB.
bulletHd/Vd external syncronization system.
bulletTrigger shutter speed up to 1/10000 sec.
 XC-55XC-55BB
Image device

1/3" interline transfer progressive scan CCD

Effective pixels

659(H) x 494(V)

Cell size7.4(H) x 7.4(V) m
CCD horizontal drive frequency12.2727 MHz
Signal systemsEIA/progressive scan
Lens mount

C mount

NF mount

Horizontal frequency15.734 KHz
Vertical frequency59.94 Hz
Sync systeminternal/external (auto)
External sync systemHd/Vd (2 to 5Vp-p)
External sync allowancehorizontal sync frequency   1%
Jitterless than 50nsec
Output modes1I 2:1 interlaced  (1/60 sec x 2)
1N: non interlaced (1/30 sec)
Horizontal resolution500 TV lines
Sensitivity400 lux, f5.6 (0 dB)
Minimum illumination0.5 lux (AGC, f1.4)
S/N ratio56 dB
GainAGC (0 to +18dB)/fixed (0dB)/manual (0 to +18dB)
factory setting: fixed same level
GammaON (gamma=0.45)/OFF (gamma=1) internal switch selection
factory setting: OFF
Normal shutter1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000 sec
Trigger shutter
(E-DONPISHA II)		1/4 to 1/100000 sec
Hd/Vd (2 to 5Vp-p)
Rear panelrear panel and pins configuration
Spectral responseresponse curve
Power supply12 Vdc (+10.5 to + 15V)
Power consumption1.8W2.2W
Dimensions
(W x H x D)		dimensional drawingdimensional drawing
Weight110ghead: 40g
CCU: 100g
Operating temperature-5C to + 45C
Operating humidity20 to 80%
Storage temperature-25C to + 60C
Storage humidity20 to 95%
Vibration resistance10G (XYZ directions)
Shock resistance70G
MTBF98600 hours94900 hours
RegulationsUL1492, FCC Class A Digital Device, CE (EN50081-2 + EN50082-2), AS4251.1
Supplied accessorieslens mount cap, operating instructions, clamp filter
 
HOME PAGE ENGLISH
COMPANY PROFILE
HOT NEWS
OFFERS
INFO
MAILING LIST
SEARCH
 
PRODUCTS RANGE
Security
Surveillance cameras
CCTV lenses
Digital Video Recorders
Monitors
IR and white light lamps
Video signal control devices
Pan & tilts
Housings
Machine vision
Industrial cameras
Machine vision lenses
Lighting for machine vision
Other products
Photographic and medical printers
DISCONTINUED PRODUCTS DATA BANK
 
TECHNICAL NOTES 
Optical calculator

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

© Rapitron s.r.l.  -  1998-2012

NEW ADDRESS/NUOVO INDIRIZZO
Via S. Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
Tel.: +39 02 659.82.82     Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova