ISDN Codec

This device allows to connect a camera having an analog video output to a LAN network or to Internet

The specifications of this product appear as a reference only, as it has been discontinued

Data transmission over ISDN line 128Kbps.

	The same device is used for transmitting and for receiving.
	No PC required for operation.
	Images display on standard surveillance monitor.
	High quality audio and video signal transmission.
	H.263 video compression (double efficiency compared with H.261).
	G722/G728 audio compression selectable.
	Input alarm sensors activate call and transmission of audio/video signals to one or more numbers stored in your list of telephone numbers (storage capacity 200 telephone numbers).
	Automatic calling function and PATROL function; the latter allows the automatic connection to different remote locations (up to 200), with sequential monitoring and selectable switching time.
	Can start 3 different alarm setup. Codec setups can differ for hour, day or week.
	Video memory. After activating an alarm, video signal is stored in a frame memory. The stored image can be transfered to a remote codec. 2 storage modes selectable: 60 sec before alarm; 30 sec before and 30 sec after alarm.
	5 video input.
	Using dome cameras 8 preset positions can be stored.

Video input

PAL composite 1.0 Vp-p 75Ω BNC x 5
(ch 1: for dome camera; ch 2-5: any 2:1 interlace camera)

Video output

PAL composite 1.0 Vp-p 75Ω

Line circuit

ISDN basic rate interface (1B/2B)

Monitor

1: with setup menu 2: without setup menu

Local output

PAL composite 1.0 Vp-p 75Ω

Video signal

DATA: conform to ITU-T, H.263/H.261 (automatic selection)

Image format

CIF (352 x 288) pixels (max 15 fps)

Imaging memory

max 35 sec

Audio input/output

1 input, 1 output (RCA pin Jack;-10 dB)

Audio signal

DATA: G.728/(G.711): frequency 3.4 KHz; G.722: frequency 7 Khz

Data port

RS-485 (RJ-11 connector)

Communication speed

4800 bps/9600 bps

Parallel port

1 D-sub 25 pin (female)

Sensor/alarm port

1 D-sub 25 pin (female)

Serial port

RS-232C (D-sub 9 pin) or RS-485 (RJ-11)

Power supply

220 ~ 240 Vac, 50 Hz

Power consumption

13W

Dimensions(W x H x D)

420mm x 44mm x 350mm

Weight

4 Kg

Connection diagram