Reference technical notes | ||||
|---|---|---|---|---|
|
All cameras are supplied without lens, unless otherwise indicated
| KP-F100C | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||
| |||||||||||
| Image device | 2/3" Bayer filter interline transfer CCD | ||||||||||
| Total no.of pixels | 1360(H) x 1034(V) | ||||||||||
| Effective no. of pixels | 1300(H) x 1030(V) | ||||||||||
| Pixel pitch | 6.7m x 6.7m | ||||||||||
| Sensing area | 8.71mm (H) x 6.90mm (V) | ||||||||||
| Horizontal scanning frequency | 12.528 Khz | ||||||||||
| Vertical scanning frequency | 12Hz | ||||||||||
| Sync system | Internal/external (automaticaly switched) non interlace | ||||||||||
| Sync input | Hd/Vd: 5Vp-p negative,1Kohm; frequency deviation: +-1% | ||||||||||
| Video output | Digital output: EIA-644 Datas: Single channel 10 bit 20.2MHz/channel | ||||||||||
| Sensitivity | 400 lux (f4, 3200 K) | ||||||||||
| Minimum illumination | 1 lux f1.4 without IR cut filter | ||||||||||
| Electronic shutter | 1/10000, 1/4000, 1/2000, 1/1000, 1/250, 1/125, 1/60, 1/30 (selectable by external switch ,factory default: OFF) diagram of electronic shutter and read out speed settings | ||||||||||
| Frame on demand function | Externally selectable to ON/OFF. External trigger signal needed. Fixed shutter mode.Two trigger mode and SYNC non reset modes selectable. Factory default: OFF | ||||||||||
| Power supply | 12Vcc +-1V | ||||||||||
| Power consumption | @500mA | ||||||||||
| Relative humidity and temperature | operating: -0C to 40C, 90% or less storage: -10C to 50C, 70% or less when using for extended period of time be sure to use camera at 40C or less | ||||||||||
| Lens mount | C | ||||||||||
| Shock resistance | 3G (30 minutes for each XYZ directions) | ||||||||||
| Vibration resistance | 30G | ||||||||||
| Dimensions (W x H x D) | 44mm x 44mm x 110mm dimensional drawing | ||||||||||
| Weight | 200g | ||||||||||
| KP-F120C/KP-F120CF | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
The specifications of these products appear as a reference only, as they have been discontinued | ||||||||||||||||||||||
| ||||||||||||||||||||||
| KP-F120C | KP-F120CF | |||||||||||||||||||||
| Image sensor | 2/3" interline CCD with Bayer filter | |||||||||||||||||||||
| Effective pixels | 1392(H) x 1040(V) | |||||||||||||||||||||
| Pixel pitch | 6.45m x 6.45m (square lattice pixel) | |||||||||||||||||||||
| Imaging area | 8.98mm (H) x 6.71mm (V) | |||||||||||||||||||||
| Scanning system | progressive | |||||||||||||||||||||
| Aspect ratio | 4:3 | |||||||||||||||||||||
| Frame rate | 30 fps | |||||||||||||||||||||
| Horizontal scanning frequency | 32.07 Khz | |||||||||||||||||||||
| Syncronization | Internal/external (automatically selectable) | |||||||||||||||||||||
| Lens mount | C | |||||||||||||||||||||
| Video output | Analog output for image checking Digital output: EIA-644 dual channel 10 bit 28.8MHz | Analog output for image checking Digital output: IEEE1394 | ||||||||||||||||||||
| External sync input | Hd/Vd: TTL level negative,10 Kohm; frequency: 0.0005% | |||||||||||||||||||||
| Electronic shutter speed | 1/50000, 1/10000, 1/4000, 1/2000, 1/1000, 1/250, 1/125, 1/60, 1/30 (selectable by external switches, default value OFF) | |||||||||||||||||||||
| Frame on demand | external switch setting off, fixed shutter, two trigger and one trigger | |||||||||||||||||||||
| Sensitivity | 400 lux (f4, 3200 K) | |||||||||||||||||||||
| Power supply | 12Vdc 1V | |||||||||||||||||||||
| Power consumption | approx. 400mA | |||||||||||||||||||||
| Temperature and relative humidity | operating: -0C at 40C, 90% or less storage: -10C to 50C, 70% or less | |||||||||||||||||||||
| Vibration endurance | 29 m/sec, 10 a 55 Hz, 30 minutes each on XYZ axes | |||||||||||||||||||||
| Shock endurance | 294 m/sec (vertical, horizontal, once each face) | |||||||||||||||||||||
| Dimensions (W x H x D) | 58mm x 58mm x 48mm dimensional drawing | |||||||||||||||||||||
| Weight | approx 220g | |||||||||||||||||||||
| Standard composition | camera operating instructions | |||||||||||||||||||||
| Optional accessories | 6 pin remote plug 12 pin plug D-OUT connector (50 pin) junction box dummy glass camera cable (molded type) 2m, 5m, o 10m tripod adaptor | |||||||||||||||||||||
| System diagram | ![]() | |||||||||||||||||||||
| HOME PAGE ENGLISH |
| COMPANY PROFILE |
| HOT NEWS |
| OFFERS |
| INFO |
| MAILING LIST |
| SEARCH |
| PRODUCTS RANGE |
| Security |
| Surveillance cameras |
| CCTV lenses |
| Digital Video Recorders |
| Monitors |
| IR and white light lamps |
| Video signal control devices |
| Pan & tilts |
| Housings |
| Machine vision |
| Industrial cameras |
| Machine vision lenses |
| Lighting for machine vision |
| Other products |
| Photographic and medical printers |
| DISCONTINUED PRODUCTS DATA BANK |
| TECHNICAL NOTES |
| Optical calculator |
Cliccate sulle parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine. © Rapitron s.r.l. - 1998-2012 P.IVA/VAT No: IT 04498890153 These pages are designed and updated esclusively by Rapitron s.r.l. |