 
Discontinued products
Digital Video Recorders
(stand alone)
for security systems 
| DX-TL2500E |
|---|
 The specifications of this product appear as a reference only, as it has been discontinued |
|---|
 | Built-in 16 channel triplex multiplexer. The monitor screen can be switched between sequential displays including full, quad, 9 or 16 split-screen mode. | | You can use two different outputs for monitors, each one operating indipendently. | | Simultaneous live picture recording and playback of any desired camera. | | The picture of a specified camera can be recorded without the image being displayed on the monitor screen. | | Picture from a particular camera can be displayed and not recorded in instances where recording of the camera picture is legally prohibited. | | 50pps capture rate (3 pps for all 16 camera). Maximum 25pps per channel. | | One large capacity HDD is built-in. Additional 2 large capacity HDDs can be added internally. | | Through SCSI interface, additional HDDS can be added externally to give up to 12 TByte (2 TB x 6ID) of memory. | | Various recording setting for each camera; you can set individual recording interval and picture grade for each camera both in normal and alarm recording. | | Both Normal and Alarm settings appear on the same screen. | | 3 kind of Alarm Recording can be set: | All recording capacity (up to 50pps) is changed to alarm recording (Normal mode). | | Alarm recording is done in addition to normal recording (Alarm Plus mode). | | Alarm recording can be done up to 25 pps by reducing normal recording rate (Alarm 25 mode). |
| | Pre-alarm recording duration can be set from 1 to 30 sec. Long pre alarm recording up to 30 min can be done, when additional HHD (optional) is built-in. | | Alarm images are recorded in a partition area where they cannot be erased automatically.The partitiona area can be set from 10% TO 90% of HDD capacity. | | You can use another mirror hard disk to achieve complete data redundancy. | | Up to 16 dome cameras even from different manufacturers can be connected to the machine. | | Full operation of the machine can be controlled by a wired remote control, which can control also the dome cameras. | | After installed, powered on and setting clock/language the unit can be set up automatically; all connected camera numbers are detected automatically and only by selecting recording period (24h, 96h, one week, one month etc.); the units assign interval and picture grade for all cameras. | | Digitally signed images can be exported through SCSI and downloaded to an external CD-R/RW, DVD-RAM, MO, DDS2/3, HDD, or ZIP. | | Three-level password (operator, manager, security manager) can be set up to limit access to settings and controls. | | CompactFlash slot: the image data can be downloaded to a CompactFlash card and played back by a PC. | | Menu setups can also ber recorded in a compact flash card, so the data can be exchanged; multiple digital recorders can then be used under the same setup conditions. | | A 192 dots area (12 vert. x 16 horiz.) can be used to detect the activity, in order to detect only the pictures to be recorded. | | The motion detector can be set both by set the points in the area (0 for On and - for Off) and by adjusting the sensitivity. | | Wavelet compression. | | 1 channel audio recording. | | Image-alteration recognition function. |
| Network software DX-PC25E | | Alarm notification to a networked PC: when the PC receives an alarm or malfunction, alarm Pop-Ups appear on the PC screen. | | The unit can notify an alarm or a malfunction up to 5 E-mail addresses (through SMTP server). | | Dome camera control (PTZ) can be managed from a remote PC over the network. | | System adjustments can be made remotely over the network (when in a password protected mode). | | Password authentication controls level access to the machine. | | Digitally signed images can be downloaded to a networked PC and can be copied to PC compatible external media. | | Playback images from copy media to PC. | | Any of the front button functions of the machine can be controlled over the network. |
| | Recording functions |
|---|
| Main recording medium | 1 built in large capacity HDD
additional 2 HDD can be added internally to increase on-board storage | | External recording medium | extended recording HDD: max 2TBx 6 Ids
backup/copying: DDS2/3, MO, ZIP, DVD-RAM, CD-R/RW
CompactFlash card slot for copying data | | Colour system | PAL system | | Signal compression system | Wavelet: sampling 13.5 MHz
Compression unit: field | | No of pixels processed | 720 x 288 | | Video input | 16 channel 1-0 Vp-p 75Ω | | Video output | 16 through output 1-0 Vp-p 75Ω BNC (during AC power supply)
Monitor output: 2 BNC 1-0 Vp-p 75Ω
S terminal: Y 1.0 Vp-p 75Ω/C 0.3 Vp-p 75Ω
Spot Monitor: 1 BNC output | | Audio input | dia=3.5 microphone -67 dBs 600Ω
RCA plug -8dBs 50kΩ | | Audio output | RCA plug on front and rear panel: -8dBs, 1 KΩ | | Horizontal resolution | more than 450 lines (Super and High picture grade) | | Recording interval | can be set for each camera with function to estimate recording possible time | | Alarm recording | recording time: 2sec, 5sec, 10sec, 15sec, 30sec, 45sec, 1min, 2min, 5min, 10min, 20min, 30min, 60min and contact input | | Pre-alarm recording | prealarm time can be set from 1 sec up to 180 sec | | Emergency recording | emergency input terminal (rear) | | Power failure recovery recording | auto restart of unit after power failure | | Used capacity recording | displays percentage of hard disk space used | | Menu language | English, German, French, Spanish and Russian | | Motion detection function | 16(H) x 12 (V) detection area setting, 5 steps detection sensitivity setting, recording start, dot number setting | | Timer adjusting function | time adjusting input (rear terminal) | | Retrieval | date & time search, index search, skip search, alarm list search, camera filtering search | | Multiplexer function | split display: 4, 9,16 split display x 2
sequential display: 1,4,9 display x 2 | | Remote access interface | RS-232C (D-SUB 9 pins) | | General |
|---|
| Power supply | 100Vac-240Vac 50/60 Hz | | Consumption | 0.3A (240V) | | Operating conditions | temperature: 5C - 40C
humidity: 30% - 80%
altitude: max 2000m | | Dimensions (W x D x H) | 425 x 375 x 118mm | | Weight | 7 Kg | | Accessories | AC power cord,instruction manual (English),quick guide (English, German, French, Spanish, and Russian) | Recording capacity table
(d=day, h=hour) | with 500Gb HDD| Picture grade | Super | High | Standard | Basic | Long |
|---|
| 50 fps | 13h | 18h | 1d 7h | 1d 19h | 3d 23h | | 25 fps | 1d 3h | 1d 12h | 2d 14h | 3d 14h | 7d 22h | | 16.66 fps | 1d 17h | 2d 7h | 3d 21h | 5d 10h | 11d 22h | | 12.5 fps | 2d 7h | 3d 1h | 5d 5h | 7d 5h | 15d 21h | | 10 fps | 2d 21h | 3d 20h | 6d 12h | 9d | 19d 21h | | 8.33 fps | 3d 11h | 4d 14h | 7d 19h | 10d 20h | 23d 20h | | 6.25 fps | 4d 15h | 6d 3h | 10d 10h | 14d 11h | 31d 19h | | 5 fps | 5d 19h | 7d 16h | 13d | 18d | 39d 18h | | 1 fps | 29d | 38d 9h | 65d 4h | 90d 4h | 198d 20h | * 50 fps possible only with multiple cameras
D=days, H=hours |
| | Front and rear panel |  |  | | Connection diagram |  |
| DX-TL800E120 |
|---|
The specifications of this product appear as a reference only, as it has been discontinued |
|---|
| Built-in full duplex 9 channel multiplexer. The monitor screen can be switched between sequential displays including full screen, quad or 9 split-screen modes. Live pictures from all cameras are recorded and play back simultaneously. | | Compact device but with one month recording (with 2 built-in 120Gb hard-disks). | | Built-in motion detector with a detection area of 192 dots, with possibility to set detection conditions (such as detection area, sensitivity, and minimal size of detection). | | Recording interval setting for each camera. | | Different recording intervals for alarm recording. The alarms from multiple cameras can also be processed simultaneously, while other cameras keep recording at the preset recording intervals. | | Remote monitoring by Intranet or Internet using Video Server Box DX-VS1. | | The picture of a specified camera can be recorded without the image being displayed on the monitor screen. | | Images recorded in the digital videorecorder can be downloaded to a Compact Flash card and then played back by a PC. | | Analog output on front panel for dubbing recording on an analog videorecorder. | | Compact Flash slot. The recorded data can be easily played back and printed using the optional DX-PC10(E) software. | | The DVR can be positioned vertically. | | During power on, emergency recording overrides all other settings (with emergency terminal grounded). | | Recording can be started in advance of the alarm trigger. | | Date & time search, alarm list search, skip search, index search and camera filtering search. | | Image files watermarking to identify it as an original image. | | 1 channel audio recording possible. | | All set up parameters can be locked with a password. | | RS-232C serial port for remote control and local configuration. |
| | Main recording medium | 120Gb HDD, possible to maximum 240Gb(2 x 120Gb) | | External recording medium | Compact Flash Card slot
(SanDisk type recommended) | | Colour system | PAL system | | Signal compression system | Wavelet (sampling 13.5MHz) | | No of pixels processed | 684 x 288 | | Video input | 9 channel 1-0 Vp-p 75Ω | | Video output | 9 channel through 1-0 Vp-p 75Ω
(during AC power supply)
2 monitor output 1-0 Vp-p 75Ω
S terminal: Y 1.0 Vp-p 75Ω/C 0.3 Vp-p 75Ω | | Audio input | 3.5e microphone-67dBs 600Ω
plug-8dBs 50 KΩ RCA | | Audio output | RCA plug on front and rear 8dBs 1 KΩ | | Horizontal resolution | more than 450 lines (super and high picture grade) | | Recording interval | can be set for each camera with function to estimate recording possible time | | Alarm recording | recording time: 2sec, 5sec, 10sec, 15sec, 30sec, 45sec, 1min, 2min, 5min, 10min, 20min, 30min, 60min and contact input | | Pre-alarm recording | pre-alarm time period has 3 settings: long, middle and short | | Emergency recording | emergency input terminal (rear) | | Power failure recovery recording | auto restart of unit after power failure | | Used capacity recording | displays percentage of hard disk space used | | Menu language | English, German, French, Spanish and Russian | | Motion detection function | 16(H) x 12 (V) detection area setting, 5 steps detection sensitivity setting, recording start dot number setting | | Timer adjusting function | time adjusting input (rear terminal) | | Retrieval | date & time search, index search, skip search, alarm list search, camera filtering search | | Multiplexer function | split display: 4/9 split display
sequential display: 1/4 display | | Remote access interface | RS-232C (D-sub 9 pins) | | Power supply | 100Vac-240Vac 50/60 Hz | | Consumption | 0.25A (240V) | | Operation conditions | temperature: 5C - 40C
humidity: 30% - 80%
altitude: max 2000m | | Dimensions (W x D x H) | 300 x 350 x 80mm | | Weight | 7 Kg | | Accessories | AC power code
instruction manual (english)
quick guide (English, German, French, Spanish and Russian) | Recording capacity table
(d=day, h=hour) | | Picture grade | Super | High | Standard | Basic | Long |
|---|
| 25 fps | 1d 3h | 1d 12h | 2d 12h | 3d 12h | 7d 18h | | 12.5 fps | 2d 7h | 3d | 5d | 7d | 15d 16h | | 8.33 fps | 3d 12h | 4d 15h | 7d 12h | 10d 15h | 23d 12h | | 6.25 fps | 4d 15h | 6d 4h | 10d | 14d | 31d | | 5.0 fps | 5d 20h | 7d 16h | 12d 12h | 17d 16h | 39d 7h | | 4.17 fps | 7d | 9d 6h | 15d | 21d 6h | 47d | | 2.5 fps | 11d 16h | 15d 10h | 25d 4h | 35d 10h | 78d 15h | | 1.0 fps | 29d 6h | 38d 16h | 63d | 88d 15h | 196d 15h | | Number of pictures | 2.566.000 | 3.383.000 | 5.483.000 | 7.700.00 | 17.034.000 |
| | Connection diagram |  |
| | |
