All cameras are supplied without lens, unless otherwise indicated

TM-6702
The specifications of this product appear as a reference only, as it has been discontinued
Single channel analog output. On-chip micro-lens for increased sensitivity and low smear. Full frame shutter 1/60 up to 1/32000 sec (up to 1/16000 at 30 Hz).. Asynchronous reset with external shutter control. Double speed progressive scan (525 lines at 60 Hz or 30 Hz). . Full frame integration. AGC on/off, gamma 1 or 0.45
Imager	1/2" progressive scan interline transfer CCD
Pixels	648 (H) x 484 (V)
Cell size	9.0 µm x 9.0 µm (square cell)
Scanning	60 Hz non interlace (double speed)/30 Hz non interlace 525 scanline both modes
Syncronization	Internal/external auto switch Hd=31.468Khz +-5% or 15.734 KHz, Vd=60Hz/30Hz or vertical asyncronous reset
Asyncronous reset	Vertical scan initialization (Vinit) upon TTL trigger from external source. Black video output while Vinit is inactive
Pixel clock	25.49 MHz/12.745 MHz
TV resolution	500(H) x 484(V)
S/N ratio	50 dB min(AGC Off), 56 dB min (30 Hz)
Min.illumination	2.0 lux at normal speed, 1.0 lux a 30Hz
Video output	1Vp-p video composite, 75 ohm non interlace
AGC	OFF (ON is a factory option)
Gamma	1.0 (0.45 is a factory option)
Electronic shutter	1-8 shutter mode switch controls exposure in periods of horizontal scan times (H). Shutter control mode 9 is controlled via external pulse width. Periods of H vary depending on scan mode. Full frame resolution per shutter. diagram of shutter control settings
Lens mount	C
Power supply	12Vcc 400 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G RMS(from 10Hz a 2000Hz)    Shock: 70G
Dimensions (W x H x L)	46.3mm x 39.4mm x 140.8mm dimensional drawing of camera and rear panel
Weight	220g
Power cable	12P02
Pins configuration	pins configuration diagram
Applications: bar code reading, high speed on-line inspections,  gauging, character reading, high definition graphics, intensified CCD cameras, fast speed surveillance, integration for scientific applications (Peltier cooling optional).

TM-6703
The specifications of this product appear as a reference only, as it has been discontinued
Single channel VGA analog output only. On-chip micro-lens for increased sensitivity and low smear. Full frame shutter (1/60 up to 1/32000). Asynchronous reset with external shutter control. Two-row scan (120 Hz) or image center partial scan (100, 222Hz or 200 lines, 130 Hz). Full frame integration.
Imager	1/2" progressive scan interline transfer CCD
Pixels	648 (H) x 484 (V)
Cell size	9.0 µm x 9.0 µm (square cell)
Scanning	60 Hz non interlace (double speed)/120 Hz (two row scanning) Partial scanning (100 and 200 lines)
Syncronization	Internal/external auto switch Hd=31.468Khz +-5%, Vd=60Hz or vertical asyncronous reset
Asyncronous reset	Ext. Vinit with output inhibit Ext.shutter speed control pulse (pulse width control)
Pixel clock	25.49 Mhz
TV resolution	500(H) x 484(V)
S/N ratio	50 dB min(AGC Off)
Min.illumination	2.0 lux at normal speed
Video output	1Vp-p video composite, 75 ohm non interlace
AGC	OFF (ON is a factory option)
Gamma	1.0 (0.45 is a factory option)
Electronic shutter	Asyncronous electronic shutter Mode A: max 1/32000 (controlled by 1H, 2H, 4H...) Modo B: External speed control pulse input Full frame resolution shutter
Lens mount	C
Power supply	12Vcc 400 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G (from 10Hz a 2000Hz)    Shock: 70G
Dimensions (W x H x L)	46.1mm x 39.4mm x 140mm dimensional drawing
Weight	240g
Power cable	12P02
Pins configuration	pins configuration
Rear panel
Applications: bar code reading, high speed on-line inspections,  gauging, character reading, high definition graphics, intensified CCD cameras, fast speed surveillance, integration for scientific applications (Peltier cooling optional).

TM-6710
The specifications of this product appear as a reference only, as it has been discontinued
Quad speed progressive scan (510 lines at 120 Hz, 60 Hz) Or partial scan up to 350 Hz. On-chip micro-lens for increased sensitivity and low smear. Full frame shutter (1/60 a 1/32000) Asynchronous reset with external shutter control 8 bit x 2 (or 8 bit x 1) RS-644 digital output and up to 120Hz analog output Full frame integration RS-232 (o RS-485) controls with Win98/NT compatible software .
Imager	1/2" progressive scan interline transfer CCD
Pixels	648 (H) x 484 (V)
Cell size	9.0 µm x 9.0 µm (square cell)
Scanning	120 Hz non interlace (quad speed) Partial scanning (50, 100 and 200 lines)
Sync  output	Hd=60.98 KHz +-5%, Vd=120Hz +-5% (at 50.980 Mhz) Hd=47.94 KHz +-5%, Vd=96Hz +-5% (at 40.06 Mhz)
External sync input	Hd=30.49KHz +-5% (at 50.980Mhz), with vertical async reset or Vd=120Hz+-5% Hd=23.97KHz +-5% (at 40.06Mhz), with vertical async reset or Vd=120Hz+-5%
Asyncronous reset	Ext. Vinit with pulse width control for shutter and integration
Pixel clock	25.49 Mhz (at 50.98Mhz) or 20.03Mhz (at 40.06Mhz)
TV resolution	500(H) x 484(V) lines
S/N ratio	50 dB min(AGC Off)
Min.illumination	4 lux at normal speed (120 frame/sec)
Analog video output	1Vp-p video composite, 75 ohm non interlace
Digital video output	2 channel 8 bit, standard RS-644 output
AGC	OFF (ON optional)
Gamma	1.0 (0.45 optional)
Electronic shutter	Asyncronous electronic shutter Mode A: 1/32000 max (controlled by 1 H, 2 H, 4 H)  Modo B: External speed control pulse input Full frame resolution shutter
Lens mount	C
Power supply	12Vcc 700 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G   Shock: 70G
Dimensions (W x H x L)	45.8mm x 39.4mm x 140mm drawing with camera dimensions
Weight	260g
Power cable	12P02
Autoiris connector	none
Pins configuration	pins configuration diagram
Rear panel
Applications: motion analysis, high speed on-line inspections,  gauging, character reading, high definition graphics, fast speed surveillance.

 

TM-9701
The specifications of this product appear as a reference only, as it has been discontinued
Digital output for progressive scan (525 lines) or interlace (RS-170) output with EIA-422 format On-chip micro-lens for increased sensitivity and low smear. Full frame shutter (1/60 a 1/16000) Asynchronous reset with external shutter control Built-in frame memory Full frame integration
Imager	2/3"   progressive scan interline transfer CCD
Pixels	768 (H) x 484 (V)
Cell size	11.6 µm x 13.6 µm
Scanning	525 lines 30Hz or 60 Hz interlace 2:1
Syncronization	Internal/external auto switch Hd/Vd, 4.0 Vpp impedance 4.7 Kohm Vd= interlace/non interlace      Hd=15.734 KHz +-5%
Clock output	14.31818 Mhz
TV resolution	570(H) x 484(V) lines
S/N ratio	50 dB min(AGC Off)
Min.illumination	1.0 lux, f=1.4 without IR filter (no shutter). Sensitivity: 10µV/e-
Video output	1Vp-p composite video 75 ohm and 888 bit RS-422 output
AGC	ON/OFF (Standard: OFF)
Gamma	0.45 or 1.0 (1.0 standard)
Lens mount	C
Power supply	12Vcc 500 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G (da 11Hz a 200Hz)     Shock: 70G
Dimensions (W x H x L)	44mm x 48.5mm x 136mm
Weight	225g
Power cable	12P02
Power supply	K25-12V or PD-12
Autoiris connector	none
Functional options	OP-51  OP-29-5
Optionals accessories	Digital cable, 31 pins connector
Applications: bar code reading, on-line inspections,gauging, character reading, high definition graphics.

Reference technical notes
Introduction to CCD cameras  Progressive scan cameras

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright ©1998 - 2010 Rapitron s.r.l.
Last modified 14-05-2010