TM-1001
The specifications of this product appear as a reference only, as it has been discontinued
Very high resolution: 1024 x 1024 pixels Digital output for progressive scan (RS-422) or analog output (monitor display format) On-chip micro-lens for increased sensitivity and low smear. Full frame shutter (1/60 a 1/16000) Asynchronous reset with external shutter control Built-in frame memory Full frame integration
Imager	1" progressive scan interline transfer CCD
Pixels	1024 (H) x 1024 (V)
Cell size	9.0 µm x 9.0 µm
Scanning	15 Hz  (30Hz display mode)
Syncronization	Internal/external auto switch Hd/Vd, 4.0 Vpp impedance 4.7 Kohm Vd= 15 Hz non interlace      Hd=15.75 KHz +-5%
Data clock output	20.0136 Mhz o 10.0068 MHz (optional)
Resolution	Digital: 1008 (H) x 1018 (V). Analog: 700 TV lines (H) x 800 TV lines(V)
S/N ratio	50 dB min(AGC Off)
Min.illumination	1.0 lux, f=1.4 without IR cut filter (no shutter). Sensitivity: 10uV/e-
Video output	1.0 Vp-p composite video 75 ohm and 8 bit RS-422 output.
AGC	ON/OFF (Standard: OFF) AGC is only effective on analog output
Gamma	0.45 or 1.0 (1.0 standard)
Lens mount	C
Power supply	12Vcc 500 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G (from 11Hz to 200Hz)     Shock: 70G
Dimensions (W x H x L)	44mm x 48.5mm x 136mm
Weight	225g
Supply cable	12P02
Accessories	Digital cable, 31 pins connector
Applications: medical imaging,  on-line inspections, gauging, character reading, high definition graphics, archiving, long range image acquisition.

TM-1010
The specifications of this product appear as a reference only, as it has been discontinued
Very high resolution: 1024 x 1024 pixels 10 bit digital output for progressive scan (RS-422). 15 frame/sec at 20 Mhz clock speed, selectable clock speed 10 Mhz and 5 Mhz.  Full frame shutter (1/60 a 1/16000) Asynchronous reset with external shutter control Built-in frame memory for async image capture. Excellent S/N ratio (>60dB). Full frame integration with uninterrupted video. RS-232 external control for gain , A/D reference, dynamic range control.
Imager	1" progressive scan interline transfer CCD
Pixels	1024 (H) x 1024 (V)
Cell size	9.0 µm x 9.0 µm
Scanning	1050 lines, 15 Hz
Syncronization	Internal/external auto switch Hd/Vd, 4.0 Vpp impedance 4.7 Kohm Vd= 15 Hz +-5% non interlace Hd=15.734 KHz +-3%
Data clock output	20.034 Mhz (standard), 10 and 5Mhz selectable.
Resolution	Digital: 1008 (H) x 1018 (V).
S/N ratio	60 dB min
Min.illumination	1.0 lux, f=1.4 without IR cut filter (no shutter). Sensitivity: 10uV/e-
Video output	digital 10-bit RS-422 output analog 1.0Vp-p composite video, 75 ohm pin configuration
AGC	OFF
Gamma	1.0
Control switches	table of mode and shutter control switch
Lens mount	C
Power supply	12Vcc 700 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G     Shock: 70G
Dimensions (W x H x L)	51.5mm x 67.5mm x 152mm dimensional drawing of the camera
Weight	225g
Supply cable	12P02
Auto iris connector	none
Functional options	TBD
Accessories	Digital cable, 31 pins connector, RS-232 cable and software
Applications: medical imaging,  on-line inspections, gauging, character reading, high definition graphics, archiving, long range image acquisition.

TM-1300
The specifications of this product appear as a reference only, as it has been discontinued
Very high resolution: 1300 x 1030 pixels 8/10 bit digital output for progressive scan (RS-422) Real time 12 frames/sec (20 Mhz data clock output) with SVGA display output. Built in continuous sync. Full frame shutter (1/50 to 1/39000) Asyncronous reset with smear reduction. Built in frame memory. Full frame integration RS-232C (or RS-485 option) external control.
Imager	2/3" interline transfer progressive scan CCD
Pixels	1300 (H) x 1030 (V) active area 5:4 aspect ratio
Cell size	6.7 µm x 6.7 µm
Scanning	1044 lines
Sync	Internal Display mode: Hd=49.5 Khz, Vd=47,2 Khz Digital output: LDV= 12,4 kHz, FDV=11,9 Hz Hd=Khz+-3%
Data clock output	20.000 Mhz
Resolution	Digital: 1300 (H) x 1030 (V)
S/N ratio	50 dB min
Minimum illumination	1.0 lux, f=1.4 without IR filter (no shutter)
Video output	Digital: 8/10 bit RS-422 Analog: SVGA 8-bit (R.G.B. channel) 1Vp-p, 75 ohm
Gain control	Manual
Gamma	1.0 (0.45 optional)
Lens mount	C
Power supply	12Vcc 600 mA ( PD-12P supplied)
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G (from 200Hz to 2000Hz)     Shock: 70G
Dimensions (W x H x L)	51mm x 67mm x 162mm
Weight	475g
Power cable	12P02
Accessories	Digital cable, 31 pins connector
Applications: medical imaging, on-line inspection, gauging, character reading, high definition graphics, archiving, long range image acquisition, intelligent transportation system.

TM-1320-15
The specifications of this product appear as a reference only, as it has been discontinued
Very high resolution: 1300 x 1030 pixels. Miniaturized housing (44 x 44 x 64mm). RS-644 (LDVS) digital or analog output. 15 frames/sec (12 frame/sec, 24 frame/sec optionally available). Maximum dynamic range control with built-in table (LUT,  look-up-table). Gamma, knee, user parameters. Full-frame integration, two-row binning (1300 x 515 pixels) at 30 frames/sec. Full frame shutter (up to 1/16000 sec). Asyncronous reset with external shutter control. RS-232C external control. Multi-camera operation with pixel clock locking phase lock loop.
Imager	2/3" progressive scan interline transfer CCD
Active area	8.7mm x 6.9mm
Pixels	1300 (H) x 1030 (V)
Cell size	6.7 µm x 6.7 µm
Scanning	1044 lines 15 Hz 522 lines 30 Hz (two-row binning)
Sync	Internal/external auto switch Hd/Vd, 4.0 Vp-p, 4.7KΩ Vd= 15Hz ± 5% non-interlace Hd=15.47Khz ± 5%
Data clock output	25.00 Mhz
Resolution	Digital: 1300 (H) x 1030 (V) Analog: over 900(H) x 800 TV lines
S/N ratio	50 dB min (AGC off)
Minimum illumination	1.0 lux, f=1.4 without IR (no shutter) sensitivity: 10µV/e-
Video output	Analog: 1.0 Vp-p video composite, 75Ω Digital: 8 bit RS-644 connector and pin configuration
AGC	Off
Gamma	programmable LUT (1.0 standard)
Lens mount	C
Power supply	12Vcc ± 10% 500 mA (current measured at 25°)
Operating temperature	-10C° to 45C°
Vibration	7Grms (from 10Hz to 2000Hz) random
Shock	70G
Dimensions (L x A x P)	44mm x 44mm x 64mm dimensional drawing
Weight	133g
Functional options	adjustable back-focus front-end, 12 frames/sec, 24 frames/sec, pixel clock locking
Power cable	12P02S
Applications: machine vision, medical imaging, intelligent transportation systems, high definition graphics, gauging, character recognition, document archiving and surveillance.

 

TM-1040
The specifications of this product appear as a reference only, as it has been discontinued
Very high resolution: 1024 x 1024 pixels On-chip micro-lens for increased sensitivity and low smear. Internal 10-bit A/D for digital RS-343A analog output (RS-170 optional). Real time, 30 frames/sec., 40 Mhz clock speed. Full frame shutter (1/60 a 1/16000) Asynchronous reset with external shutter control Built-in frame memory for async image capturing. Full frame integration with continuous video output. RS-232C external control for gain and dynamic range.
Imager	1" progressive scan interline transfer CCD
Pixels	1024 (H) x 1024 (V)
Cell size	9.0 µm x 9.0 µm
Scanning	1050 lines, 30 Hz
Syncronization	Internal/external auto switch Hd/Vd, 4.0 Vpp impedance 4.7 Kohm Vd= 30 Hz +-5% non interlace Hd=31.468 KHz +-3%
Data clock output	40.068 Mhz
Resolution	Digital: 1008 (H) x 1018 (V).  Analog: over 700 TV lines (H) x 800 TV lines(V)
S/N ratio	50 dB min. analog, up to 60 dB digital
Min.illumination	1.0 lux, f=1.4 without IR cut filter (no shutter). Sensitivity: 10uV/e-
Video output	RS-343A (RS-170 optional), 1.0 Vp-p composite video, 75 ohm and up to 10-bit RS-422 output. pin configuration
AGC	OFF
Gamma	1.0
Control switches	mode control and shutter control switch
Lens mount	C, back focus adjustable
Power supply	12Vcc 800 mA
Operating temperature	-10C° to 50C°
Vibration & shock	Vibration: 7G (200 Hz to 2000Hz)     Shock: 70G
Dimensions  (W x H x L)	68mm x 52mm x 174mm dimensional drawing of camera
Weight	506g
Supply cable	12P02
Auto iris connector	none
Accessories	Digital cable, 31 pins connector,, RS-232 cable and software
Applications: medical imaging, on-line inspections, intelligent transportation systems, gauging, character reading, high definition graphics, archiving, long range image acquisition.

 

Reference technical notes
Introduction to CCD cameras  Progressive scan cameras

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
  Via Washington 59  -  20146 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright ©1998 - 2010 Rapitron s.r.l.
Last modified 14-05-2010