Search

Liquid cooling

By forcing water circulation (or a cooling liquid or compressed air) inside the cilindric shaped interspace that divide the outer tubolar surface from the inner one , it is possible to maintain cooled the housing internal room. It is convenient to verify which are the available features of flow capacity and cooling liquid temperature before proceeding with the installation. It is possible to realize a closed cooling circuit, namely with ri-cicling and cooling of the liquid , or an open circuit, with water to looose.

 

CHXC
Sturdy construction entirely made of AISI316L stainless steel developed for industrial applications. Resistant to extremely high temperatures: housing suitable up to 130 with standard tempered glass or up to more than 400 with Vycor glass >(optional). Can be equipped with air barrier flange to clean the glass window where water cannot be used. Adaptors available for any kind of installation: wall, ceiling, pole and corner mount adapters. IR filters available.
Costruction	stainless steelAISI 316L
Cable entry	2 metal cable glands M16x1.5
Glass	standard 5mm tempered glass for environmental temperature up to 130 (max glass temperature 130 for continuous operation, 150 for peak operation) Vycor 6mm glass for temperature up to 400C (max glass temperature 900 for continuous operation, 1200 for peak operation)
Protection index	IP68, 10m index of protection table
Heater thermostat	On: 15C 5C Off: 22C > 4C
Heater PTC	HT230: 100-240V ~ 40W HT12-24: 12-24V ~ 20W
Temperature range with heater	-20 to 50C Environment temperature Water flow (20C) Housing internal temperature 200C 2l/min 35 300C 2.5l/min 45 400C 7.5l/min 50
Camera power supply unit	Vin: 230V~50Hz, Vout: 12Vdc 400mA  Vin: 230V~50Hz, Vout: 24Vac 400mA
Dimensions	useful area: 85mm x 85mm useful length: 342mm
Weight	11.9 Kg (without accessories)
Construction drawing
Optional accessories	heater with thermostat camera height adjustment kit camera power supply air barrier flange (requires an air filter group) wall bracket with swivel air filter group (for flange) infrared filter holder infrared filter Vycor glass for high temperatures pole mount adapter corner mount adapter ceiling adapter
Accessories
BWX
Heavy duty bracket with joint. Made of AISI 316 thick gauge stainless steel. It can be completed with pole and corner mount adaptors.
BAX
Flange for glass cleaning. Creates an air barrier on the glass front of the housing in order to prevent the deposit of dust on the outer surface of the glass by keeping it ventilated. On the internal side of the flange there are thin holes that concentrate the flow of compressed air as a vortex. For proper use it is necessary to check what is the environment temperature value and place the air filter group at the correct distance from the heat source.
GFA
Filtering group for air flow regulation and filtering from contaminating agents such as water, oil and solid particles. Made up of one regulator filter which, besides regulating the maximum working pressure, filters particles of 5 m and a second filter which filters of 0.01 m. The regulator filter separates the air from impurities, both solid and liquid and regulates the pressure to the desired value which obviously cannot be higher than line pressure. The airflow has to follow the direction of the arrow indicated on the body. The filter separates the air from its impurities, both liquid and solid.
Connection	input: G1/4 output: G1/4
Type of connection	thread on the body
Weight	0.443 (R) + 0.342 (F) Kg
Mounting	vertical in-linea or wall mounted
Operating temperature	0C to 50C at 10 bar
Void fraction of filter element	5m (R); 0.01m (F)
Condensate removal	manual/semi-automatic
IN pressure	0.3 16 bar
Dimensions (W x H x D)	190.5 x 90 x 45mm

 

Reference technical notes
Protection index table

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright 2010 Rapitron s.r.l.
Last modified 29-12-2010