HOME PAGE ENGLISH
COMPANY PROFILE
HOT NEWS
OFFERS
INFO
MAILING LIST
SEARCH
 
PRODUCTS RANGE
Security
Surveillance cameras
CCTV lenses
Digital Video Recorders
Monitors
IR and white light lamps
Video signal control devices
Pan & tilts
Housings
Machine vision
Industrial cameras
Machine vision lenses
Lighting for machine vision
Other products
Photographic and medical printers
DISCONTINUED PRODUCTS DATA BANK
 
TECHNICAL NOTES 
Optical calculator

LogoRapitron

Industrial video
Progressive scan color cameras
GigE

Sito in italiano


Search

Custom - Monochrome - Color - Line scan - Accessories

Color cameras:
Interlaced board - Remote head board - USB board color
Interlaced color - Remote head - Camera Link -  USB - GigE - HD
Borescopes - Transit cameras - Zoom autofocus
Measurement software

Cameras with programmable FPGA

An FPGA (Field Programmable Gate Array) is an integrated circuit which is user programmable by software.

Power Plus camera operating diagram

Operating diagram of a Power plus camera

All cameras are supplied without lens, unless otherwise indicated

STC-GEC33A/GEC83A
STC-GEC33OX/GEC83OX
Monochome GigE camera

Available models

  1. Standard cameras: STC-GEC33A, STC-GEC83A

  2. Standard cameras with POE (Power Over Ethernet): STC-POGEC33A, STC-POGEC83A

  3. Power Plus cameras

    1. with user programmable Xilinx FPGA:  STC-GEC33OX, STC-GEC83OX

    2. with user programmable Altera FPGA (not available yet)

Standard features
  1. Progressive scan GigE monochrome camera, Genicam compatible.
  2. Compact precision metal housing.
  3.  1/3" 659(V) x 494(H) VGA or 1024 (H) x 768 (V) XGA sensor
  4. 30, 60, 90 fps frame rate
  5. Digital output.

  6. Comunication by 12 pin Hirose connector or Ethernet connector.

  7. Available Sentech software:

    1. SDK (Software Development Kit).

    2. Viewing and control software

    3. Gamma table

    4. Control software

    5. Uploading FPGA files

  8. Supported driver: Linux Red Hat

Power Plus models
Additional features
  1. All the features of standard models.

  2. Onboard Xilinx or Altera configurable FPGAs.

  3. 32MB user accessible memory.
  4. 8 opto isolated user configurable I/O.
  5. Accessble JTAG connector for easy debugging.
  6. POE (Power Over Ethernet)
 STC-GEC33A
STC-GEC33OX		STC-GEC83A
STC-GEC83OX
Imager

1/3" progressive scan interline transfer CCD

ICX424AQ

ICX204AQ

Resolution VGA (0.3 Mpixel)XGA (0.8 Mpixel)
Frame rate30, 60, 90 fps36 fps
Active pixel

648(H) x 494(V)

1024 (H) x 768 (V)
Cell size

7.4 µm x 7.4 µm (square cell)

4.65 µm x 4.65 µm (square cell)

Vertical frequency89.91172 Hz (full resolution)
0.72028 to 360.33325 Hz
(adjustable via communication)		36.42113 Hz (full resolution)
0.44238 to 147.16356 Hz
(adjustable via communication)
Horizontal frequency47.2028 KHz28.9907 KHz
Horizontal drive frequency36.8181 MHz36.8181 MHz
Scanning

full
partial (1/2, 1/4)

Sync systeminternal
 Gigabit Ethernet
Video output8, 10, 12 bit digital (raw data) or RGB 8 bit
Hardware interfaceIEEE802.3 (1000Base-T)
ProtocolGigE Vision 1.2 and GeniCam 2.0 compiant
CableCAT-5e/CAT-6 LAN cable

ALC

auto-iris lens, electronic iris and  AGC (on/off)

Communicationthrough Ethernet port
Trigger modeedge preset trigger
pulse width trigger(unlimited extended exposure)
Shutter speedpreset continuous mode: 1 to 16.777.216 μsec
preset trigger mode:1 to 16.777.216 μsec
pulse width mode: 1 to unlimited μsec		preset continuous mode: 10 to 16.777.216 μsec
preset trigger mode:10 to 16.777.216 μsec
pulse width mode: 10 to unlimited μsec
Minimum illumination0.12 lux at f1.2,  89.91172 Hz0.14 lux at f1.2,  36.42113 Hz
Gain0 to 20.4dB
S/N ratio

8 bit <=3 digit (gain 0 dB)
10 bit <=12 digit (gain 0 dB)
12 bit <=48 digit (gain 0 dB)

Gamma1.0 (factory default) or uploadable gamma table
ROI functionprogrammable ROI setting via the communication
Smear reductionselectable on/off via the communication
Color Interpolationavailable on RGB output
White balanceauto, manual and push-to-set white balance
(is available on both raw data output and RGB output)
Lens mountC
Interface connectorMOD-YSJ88YA03C + (HONDA), HR10A-10R-12PB (Hirose)
Optical filterIR cut filter
Optical center accuracypositional accuracy in H and V directions:  ± 0.31mm
rotational accuracy in H and V directions: ± 2.1°
 Power plus
User configurable boardFPGA: Xilinx: Spartan-3AXC3SD1800A; Altera: EPC340U484
DDR2: MT47H16M16BG-37E-B (Micron), 32 Mb
EEPROM: M95512-RMN6TP (ST Micro), 512KB
ROM configuration: M25P80-VMP6G (ST Micro), 8MB

Shock

70G(3 directions, 3 times each)

Vibration10G (20 to 200Hz)
Power supply+10.8 to 26.4 Vcc
Power consumption<5.0W
Operating temperature-10C° to 45C°-5C° to 40C°
Storage temperature-30° to 65°C
Dimensions
(H x W x D)		35mm x 35mm x 50.6mm
(excluding connectors)
dimensional drawing
Rear panel

GigE camera rear panel

Weight120g

 

STC-GEC152A/GEC202A
STC-GEC152OX/GEC202OX
Monochome GigE camera

Available models

  1. Standard cameras: STC-GEC152A, STC-GEC202A

  2. Standard cameras with POE (Power Over Ethernet): STC-POGEC152A, STC-POGEC202A

  3. Power Plus cameras

    1. with user programmable Xilinx FPGA:  STC-GEC152OX, STC-GEC202OX

    2. with user programmable Altera FPGA (not available yet)

Standard features
  1. Progressive scan GigE monochrome camera, Genicam compatible.
  2. Compact precision metal housing.
  3. 1/2"  SVGA or 1/1.8" UXGA sensor
  4. 19 or 15  fps frame rate
  5. Digital output.

  6. Comunication by 12 pin Hirose connector or Ethernet connector.

  7. Available Sentech software:

    1. SDK (Software Development Kit).

    2. Viewing and control software

    3. Gamma table

    4. Control software

    5. Uploading FPGA files

  8. Supported driver: Linux Red Hat

Power Plus models
Additional features
  1. All the features of standard models.

  2. Onboard Xilinx or Altera configurable FPGAs.

  3. 32MB user accessible memory.
  4. 8 opto isolated user configurable I/O.
  5. Accessble JTAG connector for easy debugging.
  6. POE (Power Over Ethernet)
 STC-GEC152A
STC-GEC152OX

STC-GEC202A
STC-GEC202OX

Imager

1/2" progressive scan interline transfer CCD

1/1.8" progressive scan interline transfer CCD

ICX205AKICX274AQ
Resolution SXGA (1.3 Mpixel)UXGA (2 Mpixel)
Frame rate19 fps15 fps
Active pixel

1360(H) x 1040(V)

1624 (H) x 1236 (V)
Cell size

4.65 µm x 4.65 µm (square cell)

4.4 µm x 4.4 µm (square cell)

Vertical frequency19.25954 Hz (full resolution)
0.31387 to 71.66965 Hz
(adjustable via communication)		15.31668 Hz (full resolution)
0.29261 to 61-26674 Hz
(adjustable via communication)
Horizontal frequency20.5688 KHz19.1761 KHz
Horizontal drive frequency36.818175 MHz
Scanning

full
partial (1/2, 1/4)
binning

Sync systeminternal
 Gigabit Ethernet
Video output8, 10, 12 bit digital (raw data)
Hardware interfaceIEEE802.3 (1000Base-T)
ProtocolGigE Vision 1.2 and GeniCam 2.0 compiant
CableCAT-5e/CAT-6 LAN cable

ALC

auto-iris lens, electronic iris and  AGC (on/off)

Communicationthrough Ethernet port
Trigger modeedge preset trigger
pulse width trigger(unlimited extended exposure)
Shutter speedpreset continuous mode: 10 to 16.777.216 μsec
preset trigger mode:10 to 16.777.216 μsec
pulse width mode: 10 to unlimited μsec
Minimum illumination0.11 lux at f1.2,  19.25954 Hz0.85 lux at f1.2,  15.31667 Hz
Gain0 to 20.4dB
S/N ratio

8 bit <=3 digit (gain 0 dB)
10 bit <=12 digit (gain 0 dB)
12 bit <=48 digit (gain 0 dB)

Gamma1.0 (factory default) or uploadable gamma table
ROI functionprogrammable ROI setting via the communication
Smear reductionselectable on/off via the communication
Color Interpolationavailable on RGB output
White balanceauto, manual and push-to-set white balance
(is available on both raw data output and RGB output)
Lens mountC
Interface connectorMOD-YSJ88YA03C + (HONDA), HR10A-10R-12PB (Hirose)
Optical filterIR cut filter
Optical center accuracypositional accuracy in H and V directions:  ± 0.31mm
rotational accuracy in H and V directions: ± 2.1°
 Power plus
User configurable boardFPGA: Xilinx: Spartan-3AXC3SD1800A; Altera: EPC340U484
DDR2: MT47H16M16BG-37E-B (Micron), 32 Mb
EEPROM: M95512-RMN6TP (ST Micro), 512KB
ROM configuration: M25P80-VMP6G (ST Micro), 8MB

Shock

70G(3 directions, 3 times each)

Vibration10G (20 to 200Hz)
Power supply+10.8 to 26.4 Vcc
Power consumption<5.0W
Operating temperature-10C° to 45C°-5C° to 40C°
Storage temperature-30° to 65°C
Dimensions
(H x W x D)		35mm x 35mm x 50.6mm
(excluding connectors)
dimensional drawing
Rear panel

GigE camera rear panel

Weight120g

 

STC-GEC500A
STC-GEC500OX
Monochome GigE camera

Available models

  1. Standard camera: STC-GEC500A

  2. Power Plus cameras

    1. with user programmable Xilinx FPGA:  STC-GEC500OX

    2. with user programmable Altera FPGA (not available yet)

Standard features
  1. Progressive scan GigE monochrome camera, Genicam compatible.
  2. Compact precision metal housing.
  3. 2/3"  QSVGA sensor.
  4. 15  fps frame rate.
  5. Digital output.

  6. Comunication by 12 pin Hirose connector or Ethernet connector.

  7. Available Sentech software:

    1. SDK (Software Development Kit).

    2. Viewing and control software

    3. Gamma table

    4. Control software

    5. Uploading FPGA files

  8. Supported driver: Linux Red Hat

Power Plus models
Additional features
  1. All the features of standard models.

  2. Onboard Xilinx or Altera configurable FPGAs.

  3. 32MB user accessible memory.
  4. 8 opto isolated user configurable I/O.
  5. Accessble JTAG connector for easy debugging.
  6. POE (Power Over Ethernet)
 STC-GEC500A
STC-GEC500OX
Imager

2/3" progressive scan interline transfer CCD

ICX625AL
Resolution QSXGA (5 Mpixel)
Frame rate15 fps
Active pixel

2448 (H) x 2058 (V)

Cell size

3.45 µm x 3.45 µm (square cell)

Vertical frequency15Hz (at full resolution)
Horizontal frequency31.1284 KHz
Horizontal drive frequency59.8908 MHz
Scanning

full
partial (1/2, 1/4)

Sync systeminternal
 Gigabit Ethernet
Video output8, 10, 12 bit digital (raw data)
Hardware interfaceIEEE802.3 (1000Base-T)
ProtocolGigE Vision 1.2 and GeniCam 2.0 compiant
CableCAT-5e/CAT-6 LAN cable

ALC

auto-iris lens, electronic iris and  AGC (on/off)

Communicationthrough Ethernet port
Trigger modeedge preset trigger
pulse width trigger(unlimited extended exposure)
Shutter speedpreset continuous mode: 10 to 16.777.216 μsec
preset trigger mode:10 to 16.777.216 μsec
pulse width mode: 10 to unlimited μsec
Minimum illumination0.24 lux at f1.2,  15 Hz
Gain0 to 20.4dB
S/N ratio

8 bit <=3 digit (gain 0 dB)
10 bit <=12 digit (gain 0 dB)
12 bit <=48 digit (gain 0 dB)

Gamma1.0 (factory default) or uploadable gamma table
ROI functionprogrammable ROI setting via the communication
Smear reductionselectable on/off via the communication
Color Interpolationavailable on RGB output
White balanceauto, manual and push-to-set white balance
(is available on both raw data output and RGB output)
Lens mountC
Interface connectorMOD-YSJ88YA03C + (HONDA), HR10A-10R-12PB (Hirose)
Optical filter IR cut filter
Optical center accuracypositional accuracy in H and V directions:  ± 0.31mm
rotational accuracy in H and V directions: ± 2.1°
 Power plus
User configurable boardFPGA: Xilinx: Spartan-3AXC3SD1800A; Altera: EPC340U484
DDR2: MT47H16M16BG-37E-B (Micron), 32 Mb
EEPROM: M95512-RMN6TP (ST Micro), 512KB
ROM configuration: M25P80-VMP6G (ST Micro), 8MB

Shock

70G(3 directions, 3 times each)

Vibration10G (20 to 200Hz)
Power supply+10.8 to 26.4 Vcc
Power consumption<6.0W
Operating temperature 
Storage temperature-30° to 65°C
Dimensions
(H x W x D)		50mm x 50mm x 53.4mm
(excluding connectors)
Rear panel

GigE camera rear panel

Weight120g

 

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright 1998 - 2011 Rapitron s.r.l.
Last modified 04-08-2011