Search

Sentech cameras:

Custom - Black/white - Color - Line scan - Accessories

Other color cameras:

Interlaced board - Remote head board - USB board color
Interlaced color - Remote head - Camera Link -  USB - GigE - HD
Borescopes - Transit cameras - Zoom autofocus
Measurement software

All cameras are supplied without lens, unless otherwise indicated

STC-R645 series
Super small CCU. 3rd generation 10-bit programmable DSP (digital signal processing). Powerful DSP software for digital control of the cameras' setup. Tiny Micro Head (10m diameter). Exceptional crisp color reproduction. Available also in board configurations. NTSC optional. Available with different camera control unit (see below). Available lenses: 2.7mm micro lens 4.0mm micro lens 8.0mm micro lens 16.0mm micro lens C mount adapter Connection cable lenght: 2m 3m 5m 10m Choice of different head types: right angle (HD) right angle image downward (LHD) right angle image upward (UHD)
Available head types
STC-R645CC	STC-R645CT	STC-R645AS
Push-to-set Auto White Balance 12 pin Hirose Power, Y/C out, Hd/Vd In BNC connector video out Y/C connector Y/C out RS-232C mini-jack DSP setup camera control Hd/Vd sync	Push-to-set Auto White Balance Power terminal. BNC connector video out Y/C connector Y/C out RS-232C mini-jack DSP setup camera control Hd/Vd sync	12 pin Hirose Power, Y/C out, Hd/Vd In BNC connector video out Manual controls for: color brightness sharpness gamma

Pickup device	1/4" interline transfer CCD
Pixels	752 (H) x 582 (V)
Signal	PAL (NTSCon request)
Scanning	2:1 interlace
Horizontal frequency	15.625 Hz
Vertical frequency	50 Hz
Horizontal resolution	480 lines
Sync system	internal/external VBS (CT) Hd/Vd (CC)
Minimum illumination	1.1 lux with f=1.2, 50 IRE
S/N ratio	> 48 dB (AGC off)
AGC	ON/OFF selectable
Video output	video composite VBS=1Vp-p, 75Ω (PAL) Y/C 0.7Vp-p, 75 Ω (S-VHS) (on selected models only)
Gamma	0.45 (default) DSP adjustable (32 steps)
White balance	Auto/manual/push-to-set (CC/CT models only)
Serial input/output	RS-232 for remote control (for DSP)
Backlight compensation	activated with AGC and electronic iris
Shutter	Auto: 1/50-1/10.000 Fixed
Lens mount	micro and C mount(with adapter)
DSP	10 bit, user programmable
Power supply	10-12Vdc 220 mA
Operating temperature	from -10C° a 40C°
Dimensions (W x H x D)	CCU: 51mm x 51mm x 55.5mm head: 10mm dia dimensional drawing
Weight	190g
Applications: pipe inspection, robotics, vision systems, microscopy, medical research, remote surveillance.

 

Reference technical notes
Introduction to CCD cameras

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

Rapitron s.r.l.
NEW ADDRESS/NUOVO INDIRIZZO
  Via S.Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
      Tel.: +39 02 659.82.82   Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova

Copyright © 2011 Rapitron s.r.l.
Last modified 29-04-2011