LogoRapitron

Sito in italianoVideo signal control and         
processing devices
Digital video stabilizers

Steady Eye

Switchers, amplifiers • Motion detectors • Remote controls • Screen dividers • Video server • Twisted pair • Video over cellular • Stabilizers • Tracking


Search

SEDesk

Desktop digital video stabilizer

bulletWorks with standard analog cameras.
bulletAccepts NTSC and PAL signals.
bulletVideo input and output signals: video composite.
bulletCorrects all shake: right-left (X), high-low (Y), rotation, zoom.
bulletFull resolution.
bulletSimple on-screen or DIP switch selection of parameters.

Video demo

camera mounted on a droneparking surveillance camera
Video input

1 input, 75 ohm, BNC connector, auto-detect PAL or NTSC

Video output

1 output, 75 ohm, BNC connector, adapted to input format

Power supply

12 Vdc 1.2A, power plug 2.5 x 5.5 x 14mm, center+

Operating temperature0° to 50° C
humidity 20 - 95%, non condensing
Dimensions (H x D x L)55mm x 169mm x 185mm
Finish

black power-coated aluminum

ProtectionIP65
Compliance

FCC Part 15B class A
EN55022 class A
EN61000-3-2
EN61000-3-3
EN61000-6-2

Power failure safeall user settings stored in EEPROM
Application setup12 DIP switches for parameter selection
Board featuresEquator BSP-15 DSP
DynaPel coprocessor
64MB SDRAM
4MB flash
4kbit parameter memory
video decoder, ITU 656 YUV 4:2:2 format
video encoder, ITU 656 YUV 4:2:2 format
extension slot
Stabilization correctionX/Y correction
rotation correction
zoom correction
Zoom settingsno digital zoom
5% -50% digital zoom
Vibration typefast/medium/slow/very slow
Output video latencyapprox 100 milliseconds
Exclusion areasdefault region of interest is entire frame
definition of top and bottom frame exclusion areas (exclude lettering)
Demo modepicture-in-picture demo mode
side-by-side demo mode

Applications

with high power zoom, with strong wind, for cameras mounted in factories with vibration from machinery, air conditioning, buses, trains, cars, ships and boats, unmanned aerial vehicles (drones), tall buildings, bridges and tunnels, coastal surveillance at windy locations, pole mounted cameras for traffic monitoring.

 

SE100/SE200

Rack type digital video stabilizer

bullet19" rack mount solution for professional use.
bulletAvailable with 1 or 2 channels.
bulletEthernet connectivity.
bulletWorks with standard analog cameras.
bulletAccepts NTSC and PAL signals.
bulletVideo input and output signals: video composite.
bulletCorrects all shake: right-left (X), high-low (Y), rotation, zoom.
bulletFull resolution.
bulletSimple on-screen or DIP switch selection of parameters.

Video demo

camera mounted on a droneparking surveillance camera
 SE100SE200
Video input

1 input, 75 ohm, BNC connector,
auto-detect PAL or NTSC
S-video, 4 pin mini DIN connector

2 input, 75 ohm, BNC connector, auto-detect PAL or NTSC
S-video, 4 pin mini DIN connector

Video output

1 output, 75 ohm, BNC connector,
adapted to input format
S-video, 4 pin mini DIN connector

2 output, 75 ohm, BNC connector,
adapted to input format
S-video, 4 pin mini DIN connector

Power supply

100-240 Vac 50/60 Hz

Operating temperature0° to 50° C
humidity 20 - 95%, non condensing
Dimensions (H x D x L)44mm(1U) x 448/482mm x 284mm
Compliance

FCC Part 15B class A
CE
UL

Power failure safeall user settings stored in EEPROM
Application setupvia OSD from external joystick or DVR
via OSD from keypad at front panel
via Web browser
Board features

Equator BSP-15 DSP
DynaPel  coprocessor DNA 2030
64MB SDRAM
4MB flash
4kbit parameter memory
video decoder, ITU 656 YUV 4:2:2 format
video encoder, ITU 656 YUV 4:2:2 format
extension slot

Firmware upgrade

through 9-pin serial (COM) port
through terminal block
via Ethernet connection
ProtectionIP65
Stabilization correctionX/Y correction
rotation correction
zoom correction
Zoom settingsno digital zoom
5% -50% digital zoom
Vibration typefast/medium/slow/very slow
Output video latencyapprox 100 milliseconds
Exclusion areasdefault region of interest is entire frame
definition of top and bottom frame exclusion areas (exclude lettering)
Demo modepicture-in-picture demo mode
side-by-side demo mode
Rear panelRack type digital video stabilizer rear panel

Applications

with high power zoom, with strong wind, for cameras mounted in factories with vibration from machinery, air conditioning, buses, trains, cars, ships and boats, unmanned aerial vehicles (drones), tall buildings, bridges and tunnels, coastal surveillance at windy locations, pole mounted cameras for traffic monitoring.

 

 

 
HOME PAGE ENGLISH
COMPANY PROFILE
HOT NEWS
OFFERS
INFO
MAILING LIST
SEARCH
 
PRODUCTS RANGE
Security
Surveillance cameras
CCTV lenses
Digital Video Recorders
Monitors
IR and white light lamps
Video signal control devices
Pan & tilts
Housings
Machine vision
Industrial cameras
Machine vision lenses
Lighting for machine vision
Other products
Photographic and medical printers
DISCONTINUED PRODUCTS DATA BANK
 
TECHNICAL NOTES 
Optical calculator

Cliccate sulle  parole evidenziate in giallo per vedere collegamenti a figure o ad altre pagine.
Click on words highlighted in yellow to view links.

Cliccate sulle immagini miniaturizzate per vederle ingrandite.
Click on thumbnails to view enlarged images.

© Rapitron s.r.l.  -  1998-2012

NEW ADDRESS/NUOVO INDIRIZZO
Via S. Antonio Maria Zaccaria 4  -  20122 Milano ITALIA
Tel.: +39 02 659.82.82     Fax: +39 02 65.45.25

P.IVA/VAT No:  IT 04498890153

Queste pagine sono disegnate e aggiornate da Rapitron s.r.l.
I marchi citati sono di proprietà dei rispettivi proprietari.
Le specifiche dei prodotti sono esposte così come dichiarate dai singoli fabbricanti e sono soggette a cambiamenti senza preavviso.
Sito ospitato da Range s.a.s.- Genova

These pages are designed and updated esclusively by Rapitron s.r.l.
All trademarks are property of the respective owners.
All products specifications are shown as declared by manufacturers and are  subject to change without prior notice.
This Web Site is hosted by Range s.a.s. - Genova